Formation of Mn2+ in La2/3Ca1/3MnO3 Thin Films due to Air Exposure

TL;DR

This study investigates the chemical instability of La2/3Ca1/3MnO3 thin films, revealing air-induced Mn2+ formation that affects magnetic properties, and shows annealing can restore the expected Mn valence state.

Contribution

It demonstrates that air exposure causes Mn2+ formation throughout the film, not just at the surface, and that annealing can recover the original Mn valence ratio, independent of substrate-induced strain.

Findings

Mn2+ forms after air exposure, reducing magnetization.

Annealing restores Mn3+/Mn4+ ratio and magnetic properties.

Valence instability occurs regardless of substrate strain.

Abstract

We report on the chemical stability of La2/3Ca1/3MnO3 thin films. X-ray absorption spectroscopy at the Mn L-edge and O K-edge makes evident deviations from the nominally expected (2/3-1/3) Mn3+/Mn4+ ratio after the growth of thin films on LaAlO3 substrates. As-grown thin films, exhibiting Curie temperature, TC, well below that of the LCMO bulk material, develop an unexpected Mn2+ contribution after a few days of air exposure which increases with time. Moreover, a reduction of the saturation magnetization, MS, is also detected. The similarity of the results obtained by electron yield and fluorescence yield demonstrates that the location of the Mn valence anomalies are not confined to a narrow surface region of the film but can extend throughout the film thickness in case of granular films. High temperature annealing not only improves the magnetic and transport properties of such as-grown films but also recovers the expected 2/3-1/3 Mn3+/Mn4+ ratio, which thereafter is stable to air exposure. Similar results on La2/3Ca1/3MnO3 films grown on SrTiO3 and NdGaO3 substrates demonstrate that there is no direct relation between the observed Mn valence instability and the strain state of the films due to their lattice mismatch with the substrate. A mechanism for the formation of Mn2+ ions formation is discussed.