Green's Function Measurements of Force Transmission in 2D Granular Materials

TL;DR

This study experimentally investigates how disorder, packing, friction, and texture influence force transmission in 2D granular materials, revealing that force response varies from lattice-like propagation to elastic behavior depending on disorder.

Contribution

It provides detailed experimental measurements of force response in 2D granular systems under various conditions, comparing results with elastic and diffusive models.

Findings

Force propagates along lattice directions in weakly disordered packings.

Increased disorder causes the force response to merge into a single direction.

Strongly disordered systems' response aligns with elastic models.

Abstract

We describe experiments that probe the response to a point force of 2D granular systems under a variety of conditions. Using photoelastic particles to determine forces at the grain scale, we experimentally show that disorder, packing structure, friction and texture significantly affect the average force response in granular systems. For packings with weak disorder, the mean forces propagate primarily along lattice directions. The width of the response along these preferred directions grows with depth, increasingly so as the disorder of the system grows. Also, as the disorder increases, the two propagation directions of the mean force merge into a single direction. The response function for the mean force in the most strongly disordered system is quantitatively consistent with an elastic description for forces applied nearly normally to a surface. These observations are consistent with recent predictions of Bouchaud et al. and with the anisotropic elasticity models of Goldenberg and Goldhirsch. At this time, it is not possible to distinguish between these two models. The data do not support a diffusive picture, as in the q-model. This system with shear deformation is characterized by stress chains that are strongly oriented along an angle of 45 degrees, corresponding to the compressive direction of the shear deformation. In this case, the spatial correlation function for force has a range of only one particle size in the direction transverse to the chains, and varies as a power law in the direction of the chains, with an exponent of -0.81. The response to forces is strongest along the direction of the force chains, as expected. Forces applied in other directions are effectively refocused towards the strong force chain direction.