# Fluoride adsorption on γ − Fe2O3 nanoparticles

**Authors:** Lakmal Jayarathna, Athula Bandara, W.J. Ng, Rohan Weerasooriya

PMC · DOI: 10.1186/s40201-015-0210-2 · 2015-07-24

## TL;DR

This study explores how γ-Fe2O3 nanoparticles efficiently remove fluoride from water, showing high adsorption rates and explaining the chemical mechanism involved.

## Contribution

The paper introduces γ-Fe2O3 nanoparticles as an effective material for fluoride removal and explains the adsorption mechanism through experimental and theoretical methods.

## Key findings

- γ-Fe2O3 nanoparticles achieved 95 ± 3% fluoride removal within 15 minutes.
- Fluoride adsorption was higher at lower pH levels due to hydroxyl group interactions.
- FT-IR and DFT results confirmed inner-sphere complex formation between fluoride and nanoparticles.

## Abstract

Fluoride contamination of groundwater, both anthropogenic and natural, is a major problem worldwide and hence its removal attracted much attention to have clean aquatic systems. In the present work, removal of fluoride ions from drinking water tested using synthesized γ-Fe2O3 nanoparticles.

Nanoparticles were synthesized in co-precipitation method. The prepared particles were first characterized by X-ray diffraction (XRD) and Transmission Electron Microscope (TEM). Density functional theory (DFT) calculations on molecular cluster were used to model infrared (IR) vibrational frequencies and inter atomic distances.

The average size of the particles was around 5 nm initially and showed a aggregation upon exposure to the atmosphere for several hours giving average particle size of around 5–20 nm. Batch adsorption studies were performed for the adsorption of fluoride and the results revealed that γ-Fe2O3 nanoparticles posses high efficiency towards adsorption. A rapid adsorption occurred during the initial 15 min by removing about 95 ± 3 % and reached equilibrium thereafter. Fluoride adsorption was found to be dependent on the aqueous phase pH and the uptake was observed to be greater at lower pH. Fourier transform infrared spectroscopy (FT-IR) was used for the identification of functional groups responsible for the adsorption and revealed that the direct interaction between fluoride and the γ-Fe2O3 particles.

The mechanism for fluoride removal was explained using the dehydoxylation pathway of the hydroxyl groups by the incoming fluoride ion. FT-IR data and other results from the ionic strength dependence strongly indicated that formation of inner-spherically bonded complexes. Molecular clusters were found to be good agreement with experimental observations. These results show direct chemical interaction with fluoride ions.

## Linked entities

- **Chemicals:** fluoride (PubChem CID 28179)

## Full-text entities

- **Genes:** GTF2E1 (general transcription factor IIE subunit 1) [NCBI Gene 2960] {aka FE, TF2E1, TFIIE-A}
- **Diseases:** bone diseases (MESH:D001847), skeletal and dental problems (MESH:C536434)
- **Chemicals:** HCl (MESH:D006851), NaOH (MESH:D012972), FeCl3 (MESH:C024555), NaNO3 (MESH:C031618), Fe(II) (-), H (MESH:D006859), H2O (MESH:D014867), Iron oxide (MESH:C000499), polystyrene (MESH:D011137), O (MESH:D010100), drinking water (MESH:D060766), F- (MESH:D005461), Cu (MESH:D003300), OH (MESH:C031356), magnetite (MESH:D052203), Fluoride (MESH:D005459), Aluminum hydroxides (MESH:D000536), HNO3 (MESH:D017942), Fe (MESH:D007501)
- **Species:** Homo sapiens (human, species) [taxon 9606]
- **Cell lines:** LJ — Homo sapiens (Human), Transformed cell line (CVCL_E498)

## Figures

7 figures with captions in the complete paper: https://tomesphere.com/paper/PMC4513747/full.md

---
Source: https://tomesphere.com/paper/PMC4513747