# Influence of Carbon Fibre Addition, Ultrasonication and Vacuum Processing on the Mechanical and Conductive Properties of Expanded Graphite Polyester Resin Composites

## TL;DR

This study explores how adding carbon fiber, using ultrasonication, and vacuum processing affects the strength and conductivity of polyester composites with expanded graphite.

## Contribution

The study systematically compares methods to balance mechanical strength and electrical conductivity in expanded graphite polyester composites.

## Key findings

- Adding 0.5–5 wt% milled carbon fibre increased electrical conductivity by up to three orders of magnitude while maintaining most of the original strength.
- Ultrasonicated expanded graphite reduced tensile strength by over 50% and decreased conductivity due to grain boundary formation.
- Vacuum-processed expanded graphite improved electrical properties significantly, achieving surface resistances in the tens-of-Ω range at 3–5 wt% loading.

## Abstract

Polyester resin composites containing expanded graphite often exhibit reduced mechanical strength due to the porous structure of the filler. The aim of this study was to enhance mechanical performance without compromising electrical behaviour. Although carbon fibre and expanded graphite are chemically identical carbon allotropes, their distinct morphologies motivated the use of carbon fibre to reinforce expanded graphite-filled polyester composites. To examine the role of expanded graphite porosity, ultrasonicated EG was used to produce exfoliated, lower-porosity particles, while vacuum processing was applied to remove entrapped air prior to curing. Adding 0.5–5 wt% milled carbon fibre increased electrical conductivity by up to three orders of magnitude relative to neat polyester while maintaining 70–80% of the original specific strength at moderate fibre contents. Ultrasonicated EG reduced tensile strength by more than 50% at 5 wt% loading and decreased conductivity due to additional grain boundary formation. Vacuum-processed EG not only provided slight mechanical enhancements but also significantly improved electrical properties by lowering surface resistance by 6–10 orders of magnitude, reaching the tens-of-Ω range at 3–5 wt% EG. This performance is comparable to previously reported conductive EG/polymer systems, which exhibit surface resistances of 10–102 Ω at 5 wt% EG. This systematic comparison offers practical guidelines for balancing conductive percolation and mechanical reinforcement in expanded graphite polyester composites.