# Fabrication of Cellulose Acetate-Based Membrane Doped with Plasticizer for High-Efficiency Separation of CO2

**Authors:** Jin Li, Zhongyong Su, Tiantian Jia, Kai Liu, Liulian Huang, Fang Huang, Xiaolin Luo, Jianguo Li, Qingxian Miao

PMC · DOI: 10.3390/polym18060740 · Polymers · 2026-03-18

## TL;DR

This paper presents a biodegradable membrane made from cellulose acetate and PEGDA that efficiently separates CO2 from O2, offering a sustainable alternative to traditional non-biodegradable membranes.

## Contribution

The study introduces a novel biodegradable membrane with enhanced CO2 separation performance using an interpenetrating polymer network structure.

## Key findings

- The membrane doped with PEGDA showed higher CO2 permeability and CO2/O2 selectivity than PEG-doped membranes.
- A 25 μm thick membrane with 10 wt% PEGDA achieved CO2 permeability of 4.59 Barrer and CO2/O2 selectivity of 5.68.
- The interpenetrating polymer network structure created more pores, improving CO2 diffusion and membrane performance.

## Abstract

It is essential to develop a practical technology for the separation and capture of carbon dioxide (CO2) due to the gradually increased concentration of CO2 in the atmosphere, which has driven the rise in global temperature. Membrane separation is regarded as a promising technology for the capture of CO2. However, most membranes employ non-biodegradable petroleum-based polymers. In this study, biodegradable and renewable membranes of cellulose acetate (CA) doped with polyethylene glycol (PEG) and polyethylene glycol diacrylate (PEGDA) were fabricated by solution casting and used for the separation of CO2/O2. The results indicated that the membrane doped with PEGDA exhibited higher permeability of CO2 and selectivity of CO2/O2 compared to those doped with PEG, while improving the tensile strain and structural uniformity of membranes. The membrane with a thickness of 25 μm at a PEGDA dosage of 10 wt% achieved optimal gas permeability, selectivity, and mechanical toughness, showing CO2 permeability of 4.59 Barrer and CO2/O2 selectivity of 5.68. The structure of the interpenetrating polymer network was responsible for the excellent properties of the membrane doped with PEGDA due to the formation of more mid- and micro-sized pores that increase the diffusion pathways of CO2.

## Linked entities

- **Chemicals:** CO2 (PubChem CID 280), O2 (PubChem CID 977), polyethylene glycol (PubChem CID 9033), polyethylene glycol diacrylate (PubChem CID 75282), PEG (PubChem CID 174), PEGDA (PubChem CID 75282)

## Full-text entities

- **Chemicals:** CO2 (MESH:D002245), CA (MESH:C005062), PEGDA (MESH:C437167), PEG (MESH:D011092), polymers (MESH:D011108), O2 (-)

## Full text

_Full body text omitted from this summary view._ Fetch the complete paper as Markdown: https://tomesphere.com/paper/PMC13029833/full.md

## Figures

8 figures with captions in the complete paper: https://tomesphere.com/paper/PMC13029833/full.md

## References

46 references — full list in the complete paper: https://tomesphere.com/paper/PMC13029833/full.md

---
Source: https://tomesphere.com/paper/PMC13029833