# Trace BaTiO3 Doping-Derived PVDF-Based Composite Thick Film for Dielectric Energy Storage

## TL;DR

This paper presents a PVDF-based composite thick film doped with BaTiO3 that improves dielectric energy storage performance.

## Contribution

The study introduces a low-doping BaTiO3 composite that achieves high breakdown strength and energy storage density.

## Key findings

- The composite with 0.5-3.0 wt% BaTiO3 achieved a breakdown strength of 500 MV/m.
- The optimal composite reached an energy storage density of 15.5 J/cm³.
- Performance surpassed conventional high-filler films.

## Abstract

Ceramic-polymer nanocomposites combine the respective advantages of ceramics and polymers, boasting superior mechanical flexibility, thermal stability, optical transparency, and electrical conductivity, enabling their wide use in cutting-edge fields like medicine, aerospace, optoelectronic devices, and energy storage components. Notably, ceramic-polymer nanocomposites are a promising, widely recognized strategy for developing high-energy-density, low-dielectric-loss, and flexible capacitors, due to the ceramic phase’s intrinsic high dielectric constant, which enhances dielectric capability, and the polymer phase’s high breakdown strength and mechanical flexibility. Ultimately, ceramic-polymer nanocomposites can reach an optimal dielectric performance. In this study, polyvinylidene fluoride (PVDF) was used as the matrix material and barium titanate (BaTiO3) as the reinforcing phase within the composite structure. The BaTiO3 ceramic particles were incorporated into PVDF via spin-coating technology, with composite formulations prepared at different concentrations (0.5 wt%, 1.0 wt%, 1.5 wt%, 2.0 wt%, 2.5 wt%, 3.0 wt%). A series of key parameters were measured and compared, such as the dielectric constant, breakdown strength, and energy storage density, of the BT/PVDF nanocomposite. The results indicated that the BT/PVDF nanocomposite with the optimal low BaTiO3 content demonstrates remarkable performance, achieving a breakdown strength (Eb) of 500 MV/m and an effective energy storage density of 15.5 J/cm3. This represents an improvement over conventional uniformly high-filler films.