# Techno-Economic Assessment of Integrated Wastewater Technologies for Sustainable Treatment of Highly Loaded Landfill Leachate Using GPS-XTM

**Authors:** Abdulmohsen Abdulkarim Mohammed Alkunaydiri, Nuhu Dalhat Mu’azu, Ahmad Hussaini Jagaba

PMC · DOI: 10.3390/bioengineering13030359 · Bioengineering · 2026-03-19

## TL;DR

This study assesses wastewater treatment technologies for landfill leachate in Saudi Arabia, combining modeling and economic analysis to find sustainable solutions.

## Contribution

The study introduces a practical framework integrating process modeling, regulatory compliance, and economic assessment for landfill leachate treatment.

## Key findings

- Advanced hybrid systems achieved complete TSS removal and strong phosphorus control.
- Aerobic–anoxic MBR + RO configuration showed near-complete nitrogen removal and 90% COD reduction.
- Economic analysis revealed OPEX ranging from USD 1.1 to 5.6 per cubic meter of treated leachate.

## Abstract

Landfill leachate is considered one of the most recalcitrant wastewaters due to its high organic strength, elevated ammonia concentrations, and complex chemical composition. This study evaluates integrated technologies for treating highly loaded landfill leachate from the Wadi Al-Asla landfill, Jeddah Saudi Arabia, using GPS-XTM modeling combined with regulatory compliance and techno-economic assessment (TEA). The characterized mature leachate exhibited extremely high average concentrations of COD (17,050 mg L−1), BOD5 (10,058 mg L−1), ammonia-N (989 mg L−1), and total nitrogen (1223 mg L−1), indicating severe pollution levels requiring integrated treatment technologies. Five (5) different scenarios involving integrated biological, physicochemical, and membrane-based processes were modelled, simulated and evaluated against local discharge standards complaince. Conventional and municipality-proposed upgrade configurations achieved ~80–83% COD removal, producing effluent COD > 2900 mg L−1 and 1790–1801 mg L−1 BOD5, indicating persistent non-compliance for organic pollutants. Nitrogen removal improved substantially (93.7–95.7% ammonia-N and 91–93% total nitrogen removal), yet residual ammonia-N (44–63 mg L−1) and total nitrogen (92–108 mg L−1) remained above regulatory limits. Advanced hybrid systems achieved complete TSS removal and strong phosphorus control (TP ≤ 0.42 mg L−1), while three(3) compartmental aerobic–anoxic membrane bioreactor coupled with reverse osmosis (MBR + RO) achieved near-complete nitrogen removal and reduced 90% COD removal. The lifecyle economic assessment indicated OPEX ranging from USD 1.1 to 5.6 m−3 of treated leachate with the aerobic–anoxic MBR + RO configuration yieding footprint advantage, lower CAPEX and moderate OPEX By combining process modeling, regulatory compliance evaluation, and economic assessment, this study provides a practical screening framework for selecting sustainable treatment strategies for high-strength landfill leachate and wastewater matices.

## Full-text entities

- **Chemicals:** BOD5 (-), CAPEX (MESH:D005446), ammonia (MESH:D000641), Nitrogen (MESH:D009584), phosphorus (MESH:D010758)

## Full text

_Full body text omitted from this summary view._ Fetch the complete paper as Markdown: https://tomesphere.com/paper/PMC13024435/full.md

## Figures

3 figures with captions in the complete paper: https://tomesphere.com/paper/PMC13024435/full.md

## References

47 references — full list in the complete paper: https://tomesphere.com/paper/PMC13024435/full.md

---
Source: https://tomesphere.com/paper/PMC13024435