Comparative Combinatorial Effects of Endolysins LNT103 with Ten Conventional Antibiotics against Gram-Negative Bacterial Pathogens

TL;DR

This study explores how combining a bacteriophage enzyme with antibiotics can effectively fight drug-resistant Gram-negative bacteria.

Contribution

The study provides a systematic evaluation of synergistic interactions between endolysin LNT103 and antibiotics against Gram-negative pathogens.

Findings

Synergistic interactions were observed with chloramphenicol, sulfamethoxazole, colistin, and trimethoprim in some bacterial strains.

Positive combination effects were most frequent in Pseudomonas aeruginosa compared to other species.

Endolysin concentration had a greater impact on bactericidal activity than antibiotic concentration.

Abstract

Bacteriophage-derived endolysins have emerged as promising antibacterial agents; however, their combinatorial interactions with conventional antibiotics remain insufficiently characterized across Gram-negative bacterial species. Here, we systematically evaluated synergistic, additive, or indifferent interactions between the Gram-negative–targeting endolysin LNT103 and ten clinically relevant antibiotics across 15 Escherichia coli, 10 Pseudomonas aeruginosa, and 5 Acinetobacter baumannii strains. Minimum inhibitory concentrations (MICs) and fractional inhibitory concentration indices (FICIs) were determined using checkerboard assays. Among 300 combinations tested, synergistic interactions were observed with chloramphenicol (three cases), sulfamethoxazole (three cases), colistin (two cases), and trimethoprim (one case), indicating pronounced strain dependence. When synergistic and additive interactions were considered together, positive effects were most frequent in P. aeruginosa (76.0%), followed by E. coli (54.6%) and A. baumannii (40.0%). Notably, these trends were inversely correlated with median endolysin MIC values (72, 16, and 4 μg/mL, respectively). In contrast, no correlation was observed between intrinsic antibiotic MICs and combination outcomes, and no antagonism was detected across all combinations. Time–kill assays performed on representative strains further demonstrated that endolysin concentration exerted a greater influence on bactericidal activity than antibiotic concentration. Collectively, these results indicate that intrinsic endolysin susceptibility is a primary determinant of combination efficacy and provide a rational framework for optimizing endolysin–antibiotic adjunctive therapies against multidrug-resistant Gram-negative pathogens.

Figures

C](#F1)). Two combinations (4.0%) exhibited synergy, 18 combinations (36.0%) were additive, and 24 combinations (48.0%) were indifferent. No antagonistic interactions were observed. When synergistic and additive interactions were combined, 20 of 50 combinations (40.0%) showed positive effects. Consistent with observations in *E. coli* and *P. aeruginosa*, the proportion of positive interactions inversely correlated with median LNT103 MIC values across species. In contrast, antibiotic MICs showed no direct association with combination outcomes. Among the 300 total strain–drug pairs tested, 30 c

A](#F2)). Notably, reducing the antibiotic concentration to 0.25× MIC while maintaining LNT103 at 0.5× MIC preserved bactericidal activity. In contrast, reducing the LNT103 concentration to 0.25× MIC while maintaining the antibiotic at 0.5× MIC led to diminished killing, indicating that endolysin concentration exerted a greater influence on antibacterial outcome. A similar trend was observed for *P. aeruginosa* strains ATCC15692 and CCARM2326. Treatment with 0.5× MIC of LNT103 and 0.5× MIC of chloramphenicol initially reduced viable counts, followed by limited regrowth ([Fig. 2B](#F2)), consis

Full text

Introduction

The global rise of multidrug-resistant (MDR) bacterial pathogens has intensified efforts to develop adjunctive strategies that restore or enhance the efficacy of existing antibiotics. Among emerging alternatives, bacteriophage-derived endolysins—peptidoglycan-degrading enzymes that induce rapid bacterial lysis—represent some of the most advanced protein-based antibacterial candidates currently under development [1-6]. Their rapid bactericidal activity, target specificity, and low propensity for conventional resistance have prompted growing interest in endolysin–antibiotic combination therapies, particularly for difficult-to-treat Gram-negative infections [3].

In Gram-negative bacteria, the outer membrane constitutes a major barrier to exogenously applied endolysins and plays a critical role in determining combination outcomes with antibiotics. Hong et al. engineered the Escherichia coli phage endolysin EC340 into LNT113 by incorporating outer-membrane–penetrating elements and systematically evaluated its interactions with standard-of-care antibiotics. Checkerboard analyses revealed clear synergy with colistin, whereas combinations with meropenem, tigecycline, chloramphenicol, azithromycin, and ciprofloxacin were predominantly additive [7]. Mechanistic studies further demonstrated that antimicrobial peptide fusion enhances outer-membrane disruption, facilitates access to peptidoglycan, and complements both membrane-active and intracellularly acting antibiotics.

Consistent findings have been reported for combinations of Gram-negative endolysins with polymyxins. Blasco et al. showed that combinations of colistin with the GH108 endolysin ElyA1 reduced colistin MICs, enhanced bactericidal activity in time–kill assays, and improved survival in Galleria mellonella infection models [8]. More recently, Soontarach et al. demonstrated that LysAB1245 restored colistin susceptibility in colistin-resistant isolates, enabling effective killing at reduced polymyxin doses [9]. Together, these studies suggest that synergy in Gram-negative systems most consistently arises when endolysins are paired with agents that permeabilize the outer membrane or otherwise facilitate antibiotic uptake.

LNT103 is an engineered endolysin with demonstrated activity against a broad range of Gram-negative pathogens, including E. coli, P. aeruginosa, A. baumannii, and Klebsiella pneumoniae [10]. Its antibacterial activity is partially attributable to a C-terminal amphipathic helix [11, 12], and further enhancement was achieved through site-directed mutagenesis and N-terminal fusion of an antimicrobial peptide. Although numerous endolysin–antibiotic combinations have been reported, most studies have focused on limited strain sets or individual drug partners, and generalizable principles governing combination efficacy remain poorly defined. Accordingly, recent reviews have emphasized the need for systematic, multi-species analyses to identify determinants of successful endolysin–antibiotic combination therapy [13].

In this study, we present a systematic evaluation of combinatorial effects between the engineered endolysin LNT103 and ten conventional antibiotics against three different major Gram-negative pathogens.

Materials and Methods

Bacterial Strains and Growth Conditions

The Gram-negative bacteria employed in this study included Escherichia coli, Pseudomonas aeruginosa, and Acinetobacter baumannii. Strains originated from publicly curated repositories and collaborating laboratories. For E. coli, strains 8739 and 700926 were obtained from the American Type Culture Collection (ATCC, USA), whereas strains 939 and 1460 were obtained from the Culture Collection of Antimicrobial Resistant Microbes (CCARM, Republic of Korea). AIEC45 was a kind gift from Laurent Debarbieux (Institute Pasteur Paris). Clinical isolates F435, F459, F485, F541, F615, F690, F715, F722, F782 and F892 were kindly provided by Professor Kwan Soo Ko (Sungkyunkwan University). For P. aeruginosa, strains 2092, 2134, 2144, 2200, 2298, and 2326 were obtained from CCARM, strains 9027 and 15692 were obtained from ATCC, and clinical isolates 265, 315, and 341 were kindly provided by Professor Kwan Soo Ko (Sungkyunkwan University). PMM5 and PMM8 were kind a gift from Professor Youhee Cho (Cha University). For A. baumannii, strains ACB9, ACB11, ACB12, and ACB19 were clinical isolates and kindly provided by Professor Kwan Soo Ko, and strain 2508 was obtained from the Korean Collection for Type Cultures (KCTC, Republic of Korea). Bacteria were propagated in either Luria–Bertani (LB) broth or CAA medium (5 g/L casamino acids, 5.2 mM K_2_HPO_4_, and 1 mM MgSO_4_) at 37°C with agitation (200 rpm) and cultures were used once they reached an exponential phase suitable for antimicrobial testing.

Recombinant Protein Expression and Purification

A plasmid encoding the LNT103 endolysin was introduced into E. coli BL21 Star (DE3) (Invitrogen, USA), and the recombinant endolysin was expressed and purified as previously described [10]. Briefly, bacterial cultures were grown to early logarithmic phase (OD^600^ = 0.3) and induced with 0.5 mM isopropyl β-D-1-thiogalactopyranoside (IPTG; Duchefa, Netherlands), followed by incubation at 25°C for 5 h. Cells were harvested by centrifugation, and the pellet was resuspended in lysis buffer (20 mM Tris-HCl, pH 7.5, 300 mM NaCl, and 20 mM imidazole). Cell disruption was performed using a homogenizer (Ultrasonic processor, Sonics, USA). The lysate was centrifuged at 8,000 × g for 20 min at 4°C, and the resulting supernatant was collected and filtered through a 0.2 μm pore-size filter. Protein purification was carried out using fast protein liquid chromatography (FPLC; ÄKTA pure, Cytiva, UK). The purification workflow consisted of four sequential chromatographic steps: affinity chromatography (Capto Chelating, Cytiva), cation exchange chromatography (Capto S, Cytiva), anion exchange chromatography (Capto Q, Cytiva), and hydrophobic interaction chromatography (Butyl HP, Cytiva). The final eluate was buffer-exchanged into storage buffer (20 mM sodium phosphate, 150 mM NaCl, pH 7.0) by ultrafiltration and diafiltration.

Determination of Minimum Inhibitory Concentrations (MICs) of Endolysin and Antibiotics

Antibiotics ampicillin (DAEJUNG, Republic of Korea), ceftazidime (Sigma-Aldrich, Germany), kanamycin (Sigma-Aldrich), gentamicin (Sigma-Aldrich), tetracycline (Duchefa, Netherlands), chloramphenicol (Sigma-Aldrich), sulfamethoxazole (Sigma-Aldrich), trimethoprim (Sigma-Aldrich), ciprofloxacin (MP Biomedicals, USA), and colistin (Research Products International, USA) were used. Minimum inhibitory concentrations (MICs) of the endolysin LNT103 and conventional antibiotics were determined using the broth microdilution method in accordance with CLSI guidelines [14]. LNT103 was prepared in CAA medium and serially twofold diluted in 96-well U-bottom microtiter plates to obtain final concentrations ranging from 1 to 512 μg/mL. For antibiotic testing, the same broth microdilution procedure was applied. Tested agents included ampicillin (AMP), ceftazidime (CAZ), kanamycin (KAN), gentamicin (GEN), tetracycline (TET), chloramphenicol (CAP), sulfamethoxazole (SMX), trimethoprim (TMP), ciprofloxacin (CPFX), and colistin (CST), with final concentrations ranging from 0.0078 to 512 μg/mL. Antibiotic stock solutions were prepared according to the manufacturers’ instructions, and solvent concentrations were kept constant and below levels known to interfere with bacterial growth. Bacterial suspensions were adjusted to a 0.5 McFarland standard and diluted to yield approximately 1 × 10^5^ CFU per well. Plates were incubated at 37°C for 18–20 h, and the MIC was defined as the lowest concentration showing no visible growth. All assays were performed in three independent biological replicates, and MIC values were interpreted according to CLSI criteria.

Checkerboard Assay for Endolysin–Antibiotic Combination Testing

The interaction between endolysin and antibiotics was evaluated using the checkerboard microdilution assay [15-18]. Endolysin was serially diluted along the horizontal axis, while antibiotics were serially diluted along the vertical axis of 96-well plates. Each well was inoculated with bacterial suspension to a final concentration of 1 × 10^5^ CFU per well in a 100 µL volume. Plates were incubated at 37°C for 18–20 h, and growth inhibition was assessed visually. The MIC in combination was defined as the lowest concentration of each agent that prevented visible growth when used together. Experiments were performed in triplicates.

Calculation and Interpretation of Fractional Inhibitory Concentration Index (FICI)

Synergistic interactions were quantified using the fractional inhibitory concentration index (FICI), calculated as: (MIC endolysin in combination/MIC endolysin alone) + (MIC antibiotics in combination/MIC antibiotic alone). Interpretation of FICI values: FICI ≤ 0.5: synergy, 0.5 < FICI ≤ 1.0: additive, 1.0 < FICI ≤ 4.0: indifferent, or FICI > 4.0 antagonistic interaction [17, 19]. FICI values were visualized as heatmaps using a three-level green color scale, where strong synergy (FICI ≤ 0.5) appears as dark green, additive interactions (0.5 < FICI ≤ 1.0) as medium green, and indifferent interactions (1.0 < FICI ≤ 4.0) as light green.

Time-Kill Assay

Time-kill assay was conducted to examine the combined antimicrobial activity of the LNT103 with sulfamethoxazole (E. coli strains ATCC8739 and clinical F435), with chloramphenicol (P. aeruginosa strains ATCC 15692 and CCARM 2326), or with trimethoprim (A. baumannii clinical strains 11 and 19). Bacteria were streaked on LB agar and incubated at 37°C for 18–24 h. Three to five colonies were suspended in CAA media and the turbidity was adjusted to a 0.5 McFarland standard. The suspension was subsequently diluted 1:1200 in fresh CAA media to obtain the working inoculum. LNT103 and antibiotics were freshly prepared in CAA media on the day of the experiment. Solutions were prepared at the desired final concentrations immediately before mixing with the bacterial suspension. Equal volumes of the antibiotic solution and the standardized bacterial suspension were mixed, and 100 μl of the mixture was dispensed into each well of a sterile 96-well microtiter plate. A growth control (bacteria without antibiotic) was included in each assay. Plates were incubated at 37°C, and samples were collected at 0, 1, 2, 4, 6, and 24 h. Aliquots were transferred into sterile microtubes for enumeration. Serial 10-fold dilutions (10^-1^–10^-12^) were prepared in sterile phosphate-buffered saline (PBS). A 10-μl aliquot from each dilution was spotted onto LB agar plates and incubated at 37°C for 18–24 h. Plates with 30–300 colonies were used for enumeration, and counts were expressed as colony-forming units per milliliter (CFU/mL). When no growth was detected, the detection limit of the assay was recorded. Bacterial survival was expressed as log_10_(CFU/mL) as a function of time. All experiments were performed in triplicate.

Statistical Analysis

All experiments were performed independently in triplicate. Data are presented as the mean ± standard deviation (SD). Statistical comparisons between groups were performed using Student’s t-test.

Results

Antibiotic Susceptibility Profiles Vary Widely across Gram-Negative Species and Strains

We first determined the susceptibility of all test strains to ten conventional antibiotics, together with the engineered endolysin LNT103. A total of 15 E. coli, 13 P. aeruginosa, and 5 A. baumannii strains were analyzed (Tables 1?–3). As expected, substantial inter-strain variability in antibiotic susceptibility was observed across all species. Among E. coli strains, resistance exceeding 512 μg/mL was frequently detected for ampicillin and ceftazidime, and several strains also exhibited high-level resistance to kanamycin, sulfamethoxazole, and trimethoprim (Table 1). Notably, certain strains displayed multidrug resistance profiles, with elevated MICs across multiple antibiotic classes (e.g., CCARM1460). Similarly, P. aeruginosa strains exhibited pronounced resistance to β-lactams, with multiple isolates showing MICs >512 μg/mL for ampicillin and ceftazidime (Table 2). High-level resistance was also observed for kanamycin, gentamicin, chloramphenicol, and sulfamethoxazole in selected strains. In A. baumannii, resistance to sulfamethoxazole and trimethoprim was uniformly high, whereas susceptibility to other antibiotics varied among strains (Table 3). Overall, A. baumannii exhibited higher median antibiotic MICs than E. coli and P. aeruginosa, consistent with its well-established multidrug-resistant phenotype.

Intrinsic Susceptibility to Endolysin LNT103 is Species Dependent

In contrast to antibiotic susceptibility patterns, the MIC distribution of LNT103 revealed a distinct species-dependent trend. The median MIC of LNT103 was 16 μg/mL for E. coli, 72 μg/mL for P. aeruginosa, and 4 μg/mL for A. baumannii (Tables 1?–3). Substantial intra-species variability was also observed. Notably, three P. aeruginosa strains exhibited endolysin MICs exceeding 128 μg/mL and were therefore excluded from subsequent combination analyses, as fractional inhibitory concentration indices could not be reliably calculated under these conditions. These results indicate that intrinsic susceptibility to LNT103 varies markedly among Gram-negative species and strains and is independent of conventional antibiotic resistance profiles.

Endolysin–Antibiotic Combinations Exhibit Species- and Strain-Specific Interaction Patterns

Combination testing of LNT103 with ten antibiotics across 15 E. coli strains yielded a total of 150 strain–drug pairs (Fig. 1A). Of these, five combinations (3.3%) met the criteria for synergy (FICI ≤ 0.5), 77 combinations (51.3%) were classified as additive, and 55 combinations (36.7%) were indifferent. No antagonistic interactions were detected. Synergistic effects were observed exclusively with chloramphenicol (two cases), sulfamethoxazole (two cases), and colistin (one case). When synergistic and additive interactions were considered together, 82 of 150 combinations (54.6%) exhibited positive effects. Strains CCARM939 and F715 showed the fewest positive interactions and also exhibited the highest MICs for LNT103, suggesting that reduced endolysin susceptibility limited the efficacy of combination treatments. In contrast, no consistent relationship was observed between antibiotic MIC values and the likelihood of synergy or additivity.

In P. aeruginosa, 100 combinations were evaluated across 10 strains (Fig. 1B). Two combinations (2.0%) demonstrated synergy, 74 combinations (74.0%) were additive, and 10 combinations (10.0%) were indifferent. As observed for E. coli, antagonism was absent across all combinations. Both synergistic interactions occurred in strain ATCC15692, which displayed the lowest MIC for LNT103 among tested P. aeruginosa strains. Overall, 76 of 100 combinations (76.0%) exhibited positive effects. These findings further support a dominant role for intrinsic endolysin susceptibility in determining combination outcomes, whereas antibiotic susceptibility alone did not predict interaction profiles.

Combination testing in A. baumannii included 50 strain–drug pairs across five strains (Fig. 1C). Two combinations (4.0%) exhibited synergy, 18 combinations (36.0%) were additive, and 24 combinations (48.0%) were indifferent. No antagonistic interactions were observed. When synergistic and additive interactions were combined, 20 of 50 combinations (40.0%) showed positive effects. Consistent with observations in E. coli and P. aeruginosa, the proportion of positive interactions inversely correlated with median LNT103 MIC values across species. In contrast, antibiotic MICs showed no direct association with combination outcomes. Among the 300 total strain–drug pairs tested, 30 combinations were unevaluable (N/A) because FICI values could not be determined under the assay conditions. Detailed FICI values are provided in Tables S1–S3.

Time–Kill Assays Reveal Endolysin Concentration as the Primary Determinant of Bactericidal Efficacy

To validate checkerboard-derived interaction patterns, time–kill assays were performed using two representative strains from each species that exhibited synergistic or strongly additive interactions. Combinations were tested at fractional MICs of both LNT103 and the corresponding antibiotic (Fig. 2). For E. coli strains ATCC8739 and F435, treatment with 0.5× MIC of LNT103 combined with 0.5× MIC of sulfamethoxazole resulted in complete bacterial killing (Fig. 2A). Notably, reducing the antibiotic concentration to 0.25× MIC while maintaining LNT103 at 0.5× MIC preserved bactericidal activity. In contrast, reducing the LNT103 concentration to 0.25× MIC while maintaining the antibiotic at 0.5× MIC led to diminished killing, indicating that endolysin concentration exerted a greater influence on antibacterial outcome. A similar trend was observed for P. aeruginosa strains ATCC15692 and CCARM2326. Treatment with 0.5× MIC of LNT103 and 0.5× MIC of chloramphenicol initially reduced viable counts, followed by limited regrowth (Fig. 2B), consistent with the relatively lower intrinsic susceptibility of P. aeruginosa to LNT103. Importantly, combinations containing higher endolysin concentrations consistently outperformed those with higher antibiotic concentrations but reduced endolysin exposure. For A. baumannii strains ACB11 and ACB19, combinations of 0.5× MIC of LNT103 and 0.5× MIC of trimethoprim resulted in complete killing (Fig. 2C). Reducing either agent to 0.25× MIC revealed strain-dependent differences; however, in both strains, reduced endolysin concentration was associated with a more pronounced loss of bactericidal activity than reduced antibiotic concentration.

Discussion

This study provides a comprehensive comparative analysis of endolysin–antibiotic interactions across three clinically important Gram-negative pathogens. A key finding is that positive combination effects were not associated with intrinsic antibiotic susceptibility but instead inversely correlated with endolysin MIC values. Thus, species and strains exhibiting lower intrinsic susceptibility to the endolysin tend to display a higher frequency of synergistic or additive interactions. However, no clear inverse relationship between endolysin MIC and FICI values was always observed, and endolysin MIC values did not define a distinct boundary between synergistic and additive effects in strains with lower intrinsic susceptibility to the endolysin, highlighting the importance of species- and strain-specific factors. Both synergistic and additive interactions are considered important, as their positive effects are not clearly distinguishable in in vivo animal models.

Importantly, the presence of synergy or additivity did not necessarily predict overall bactericidal efficacy. Time–kill assays revealed that endolysin concentration was the dominant determinant of antibacterial outcome, whereas increasing antibiotic concentration alone could not compensate for insufficient endolysin activity. These observations support a permeability-driven facilitation model, in which endolysin-mediated disruption of the bacterial envelope enhances antibiotic entry. Given that LNT103 contains an N-terminal cecropin A fusion domain, which is known to perturb bacterial membranes [10], adequate endolysin exposure appears essential to achieve sufficient envelope permeabilization. Below this threshold, antibiotics—even at higher concentrations—are unlikely to exert maximal activity.

Several endolysins have advanced into preclinical and clinical development [20-24], and co-administration with standard-of-care antibiotics is required in clinical trials. Our findings suggest that optimizing endolysin dosing, rather than escalating antibiotic exposure, may be critical for maximizing therapeutic benefit, particularly in the treatment of MDR Gram-negative infections.

Supplemental Materials

Supplementary data for this paper are available on-line only at http://jmb.or.kr.