# Predictive mixed-gas detection using rGO/In2O3 nanocomposite sensors assisted by machine learning

## TL;DR

A new sensor using rGO/In2O3 and machine learning can detect toxic gases at very low levels in mixed environments.

## Contribution

Integration of rGO/In2O3 nanocomposite with machine learning enables accurate detection of multiple gases in complex mixtures.

## Key findings

- The rGO/In2O3 sensor detected H2S at a limit as low as 100 ppb.
- Machine learning achieved 99.7% accuracy in distinguishing and predicting gas concentrations in mixed environments.
- The sensor platform enables smart gas sensing in real-world, complex conditions.

## Abstract

Selectivity towards specific analytes and detection at sub-ppm levels remain significant challenges for chemiresistive gas sensors. Hybrid materials, like reduced graphene oxide (rGO) combined with metal oxides, possess higher sensitivity at ultralow concentrations. In this work, rGO/In2O3 nanocomposite thin films were prepared by incorporating rGO synthesized via a modified Hummers' method into nanocrystalline In2O3, followed by spin coating and post-deposition annealing. Structural characterization confirmed the formation of phase-pure cubic bixbyite In2O3 with uniform rGO incorporation, providing abundant defect sites and efficient conductive pathways. The optimised rGO/In2O3 sensor exhibited good stability towards H2S with a detection limit as low as 100 ppb. Nevertheless, accurate identification and concentration estimation of target gases in mixed environments remain challenging. To address this, a machine-intelligent framework was employed for simultaneous gas identification and concentration prediction using a single sensor. Features derived from the dynamic response curves allow the classifier to clearly distinguish gas clusters with 99.7% accuracy and correctly predict previously unseen H2S, NH3, and CO concentrations under interfering conditions. This combined platform opens the door to smart, ultra-low-level gas sensing in real-world, complicated environments, expanding environmental and health monitoring applications.

An advanced rGO/In2O3 nanocomposite sensor integrated with machine learning and PCA enables ultra-sensitive and selective toxic gas detection in complex mixed environments.