# Synergistic Optimization of the Properties of Fiber-Content-Dependent PPS/PTFE/MoS2 Self-Lubricating Composites

## TL;DR

This study finds that adding 10% short carbon fibers to a polymer composite improves its wear resistance and friction performance, making it suitable for high-performance structural applications.

## Contribution

The study identifies the optimal carbon fiber content and reveals a synergistic lubrication mechanism in fiber-reinforced polymer composites.

## Key findings

- 10 wt% short carbon fiber (SCF) optimizes mechanical and tribological properties of PPS/PTFE/MoS2 composites.
- Excessive SCF (20 wt%) increases wear due to fiber agglomeration and micro-abrasion.
- XPS analysis reveals a synergistic lubrication mechanism involving PTFE transfer films and MoO3 surface activity.

## Abstract

This study systematically investigates the influence of short carbon-fiber (SCF) content on the mechanical, thermal, and tribological properties of self-lubricating polyphenylene sulfide (PPS) composites filled with PTFE and MoS2, addressing the critical need for high-wear resistance in Carbon-Fiber-Reinforced Thermoplastic (CFRTP) structural applications. The results identified 10 wt% SCF as the optimal content that achieved the best balance between load-bearing capacity and friction performance. The coefficient of friction μ and wear amount were reduced by 29.28% and 29.29%, respectively, compared to the PPS/PTFE/MoS2 composite material without SCF, and by 14.67% and 20.75%, respectively, compared to the material with excessive SCF filling (20 wt%). Finite-Element Analysis-Representative Volume Element (FEA-RVE) reveals the mechanism by which excessive content of SCF at the microscopic level leads to a slight decrease in mechanical properties. Critically, the tribological performance exhibited a discrepancy with bulk mechanical properties: above 15 wt% SCF, the wear rate worsened despite high mechanical strength, revealing that increased fiber agglomeration and micro-abrasion effects were the primary causes of performance deterioration. Further in-depth XPS analysis revealed a synergistic lubrication mechanism: In the optimal sample, an ultra-dense PTFE transfer film was formed to mask the underlying MoS2. This masking, coupled with the high surface activity of MoO3 particles leads to stronger physicochemical interactions with the polymer matrix, ensures the exceptional durability and stability of the tribo-film. This research establishes a complete structure–performance relationship by integrating mechanical, thermal, and tribo–chemical mechanisms, offering critical theoretical guidance for the design of next-generation high-performance self-lubricating CFRTPs.