# Thermo-History-Dependent Copper Enrichment During High-Temperature Oxidation of Recycled Steels

## TL;DR

This study explores how different heating processes affect copper buildup in recycled steel, which can cause defects during high-temperature manufacturing.

## Contribution

The study reveals that thermo-history significantly influences copper enrichment in recycled steels, offering new insights for process optimization.

## Key findings

- Copper enrichment is highly sensitive to temperature and thermal exposure time, with 1100–1150 °C promoting continuous Cu-rich liquid films.
- Conventional hot rolling enhances Cu enrichment, while strip casting inhibits it even at high Cu contents.
- Thermo-history is identified as a dominant factor in Cu-induced surface hot shortness in recycled steels.

## Abstract

The utilization of recycled steel is essential for achieving carbon neutrality and sustainable engineering, yet repeated recycling inevitably leads to the accumulation of residual elements that are difficult to remove during conventional refining. Among them, copper (Cu) readily enriches in scrap-based steels and is a primary cause of surface hot shortness during high-temperature processing due to its segregation at the oxide/steel interface. While the compositional effects of Cu have been extensively studied, the influence of thermo-history associated with different industrial processing routes remains poorly understood. In this work, Cu enrichment during high-temperature oxidation was systematically investigated under thermo-histories representative of conventional hot rolling, thin slab continuous casting and rolling (TSCR), and strip casting. Plain carbon steels containing 0.05–0.30 wt.% Cu were oxidized at 1000–1200 °C, and interfacial microstructures were characterized using SEM–EDS. The results show that Cu enrichment is highly sensitive to both temperature and thermal exposure time, with a critical temperature range of 1100–1150 °C promoting the formation of continuous Cu-rich liquid films. Prolonged thermo-history in conventional hot rolling markedly enhances Cu enrichment, TSCR partially suppresses interfacial segregation, whereas strip casting effectively inhibits Cu enrichment even at elevated Cu contents. These findings highlight thermo-history as a dominant factor controlling Cu-induced surface hot shortness and provide guidance for process optimization in recycled steels.