# Preparation of Highly Active Mg-Al-Li-B Alloys via High-Temperature Sintering

## TL;DR

Scientists created a new Mg-Al-Li-B alloy with high combustion performance by sintering at high temperatures.

## Contribution

A novel Mg-Al-Li-B alloy with enhanced combustion and oxidation resistance is developed via high-temperature sintering.

## Key findings

- Sintering at 1100°C optimizes phase formation and heat value of the Mg-Al-Li-B alloy.
- Lithium addition lowers oxidation reaction temperature and activation energy, boosting reactivity.
- Alloying increases material density and volumetric heat value, suitable for pyrotechnic and propellant applications.

## Abstract

Boron is a promising fuel, but its oxide layer impedes combustion. Alloying boron with other high-energy metals can significantly enhance its combustion performance. In this study, we sintered highly reactive lithium-containing Mg-Al-Li-B alloys using magnesium, aluminum–lithium alloy, and boron powder as raw materials. The effects of sintering temperature and holding time on the microstructure were investigated, and the combustion heat value and oxidation resistance of the alloy were tested. Results indicate that sintering temperature significantly influences phase formation: increasing temperature boosts phase content while reducing metallic phases, with 1100 °C identified as the optimal sintering temperature. Holding time had no discernible impact on the phase composition or combustion heat value of the sintered alloy. Alloying enhances material density, thereby increasing volumetric heat value. Thermal oxidation performance tests demonstrate that Li addition significantly lowers the alloy’s oxidation reaction temperature and activation energy, enhancing its reactivity. This high-heat-value, highly reactive alloy holds significant potential for application in pyrotechnics and propellants.