# Observation of interface piezoelectricity in superconducting devices on silicon

**Authors:** Haoxin Zhou, Eric Li, Kadircan Godeneli, Zi-Huai Zhang, Shahin Jahanbani, Kangdi Yu, Mutasem Odeh, Shaul Aloni, Sinéad Griffin, Alp Sipahigil

PMC · DOI: 10.1038/s41467-025-67066-z · Nature Communications · 2025-12-05

## TL;DR

The paper reports the first observation of interface piezoelectricity in superconducting devices on silicon, which contributes to qubit decoherence.

## Contribution

The study experimentally confirms interface piezoelectricity at aluminum-silicon junctions, a previously unobserved loss mechanism in superconducting qubits.

## Key findings

- Interface piezoelectricity was observed in aluminum-silicon junctions with a coupling factor of K² ≈ (3 ± 0.4) × 10⁻⁵%.
- This effect is shown to limit qubit quality factors to Q ~ 10⁴ − 10⁸ depending on surface participation and mode matching.

## Abstract

The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K2 ≈ (3 ± 0.4) × 10−5%, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 104 − 108, depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.

Superconducting qubits are sensitive to multiple noise sources that compromise their coherence. Here the authors report a piezoelectric effect in aluminum-silicon junctions, revealing a previously unexplored mechanism that may limit superconducting quantum processor performance.

## Full-text entities

- **Chemicals:** sapphire (MESH:D000537), aluminum (MESH:D000535), silicon (MESH:D012825)

## Full text

_Full body text omitted from this summary view._ Fetch the complete paper as Markdown: https://tomesphere.com/paper/PMC12796224/full.md

## Figures

4 figures with captions in the complete paper: https://tomesphere.com/paper/PMC12796224/full.md

## References

7 references — full list in the complete paper: https://tomesphere.com/paper/PMC12796224/full.md

---
Source: https://tomesphere.com/paper/PMC12796224