# Application of PVA Membrane Doped with TiO2 and ZrO2 for Higher Efficiency of Alkaline Electrolysis Process

## TL;DR

This paper explores using PVA membranes doped with TiO2 and ZrO2 to improve the efficiency and reduce the cost of hydrogen production through alkaline electrolysis.

## Contribution

The novel contribution is the development of PVA-based composite membranes with TiO2 and ZrO2 fillers that enhance thermal stability and electrochemical performance.

## Key findings

- TiO2 and ZrO2 significantly improve the thermal stability of PVA membranes.
- PVA membranes with TiO2 show ionic conductivity comparable to commercial membranes.
- The new membranes offer similar mechanical properties and better electrochemical performance at lower costs.

## Abstract

Alkaline water electrolysis is a widely researched method for hydrogen generation due to its low cost, scalability and its advantage of being able to produce hydrogen using only renewable energy. Enhancing the efficiency of electrolysis systems relies mainly on the development of high-performance ion-conductive membranes. The incorporation of ceramic fillers into polyvinyl alcohol (PVA) membranes as a composite material has shown considerable promise in enhancing the performance of electrolyzers. In this work, novel composite separator membranes for use in alkaline electrolyzers were developed from aqueous PVA solutions and physically crosslinked through a freeze–thawing process. To enhance the membrane properties, two types of ceramic fillers—titanium dioxide (TiO2) and zirconium dioxide (ZrO2)—were incorporated into the starting crosslinking solution. The thermal stability of these membranes was studied by a Differential Scanning Calorimetry (DSC) technique where we can conclude that addition of TiO2 and ZrO2 significantly influences the thermal properties of PVA membranes. These metal oxides enhance thermal stability, as shown by the shift in exothermic peaks toward higher temperatures and alterations in the degradation mechanism, evidenced by changes in the intensity and number of DSC peaks. The effect is concentration-dependent for TiO2, where higher contents produce more pronounced yet increasingly complex thermal behavior. Compared with commercial membrane (Zirfon Perl), these types of membranes exhibit better electrochemical performance at ambient temperature and pressure; however, the process of preparation is simpler, reducing the cost of the hydrogen production process. The polarization curves (U-I curves) indicated a decrease in voltage with the addition of an ionic activator based on cobalt and molybdenum. Conductivity measurements performed using electrochemical impedance spectroscopy utilizing a two-probe method revealed that PVA membranes with TiO2 exhibit ionic conductivity comparable to that of the commercial membrane. Compared to the commercial membrane, these types of membranes demonstrated similar mechanical properties and improved electrochemical performance at ambient temperature and pressure, along with a simplified production process and lower cost of hydrogen production.