# Facile Fabrication of Attapulgite-Modified Chitosan Composite Aerogels with Enhanced Mechanical Strength and Flame Retardancy for Thermal Insulation

## TL;DR

Researchers created a lightweight, strong, and fire-resistant aerogel using chitosan and attapulgite for better thermal insulation in high-temperature settings.

## Contribution

A novel composite aerogel with enhanced mechanical strength and flame retardancy using chitosan and acidified attapulgite is introduced.

## Key findings

- CS-SATP30% aerogel showed a compressive strength of 633.15 kPa at 80% strain.
- THR and PHRR were reduced to 3.83 MJ/m2 and 37.00 kW/m2, respectively.
- The material achieved an LOI of 34% and passed the UL-94 vertical burning test.

## Abstract

Aerogels are recognized as exceptional thermal insulation materials, but poor mechanical strength and flammability problems hinder their application in high-temperature environments. Thermal management materials that combine high mechanical strength with superior flame retardancy are, therefore, critically important for thermal insulation. Herein, ultra-lightweight aerogels were facilely fabricated using chitosan (CS) and acidified attapulgite (SATP) as the primary components. The optimal composite, CS-SATP30%, exhibited a compressive strength of 633.15 kPa at 80% strain, demonstrating significant improvement in mechanical properties. Structural analysis revealed that the hydroxyl groups and amino groups of CS molecules formed hydrogen bonds with SATP, ensuring excellent interfacial affinity among the constituents. Compared to pure CS aerogel, the total heat release (THR) and peak heat release rate (PHRR) of CS-SATP30% were substantially reduced to 3.83 MJ/m2 and 37.00 kW/m2, respectively. Furthermore, the limiting oxygen index (LOI) of CS-SATP30% increased to 34% and passed the vertical burning test (UL-94). This study provides a feasible way to construct advanced chitosan-based thermal insulation aerogels.