# 3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments

## TL;DR

This paper explores using seawater in 3D-printed concrete for underwater construction, showing it can work as well as freshwater in some cases.

## Contribution

The study introduces a 3D printing method for cement-based materials using seawater in simulated marine environments.

## Key findings

- Seawater mixtures showed higher yield stress and viscosity compared to freshwater mixtures.
- Seawater-based samples had better dimensional stability and similar compressive strength to freshwater samples.
- Flexural strength was significantly affected by printing geometry and medium.

## Abstract

Global demand for adaptable and rapidly deployable construction solutions in offshore, coastal, and fluvial environments continues to rise, driven by pressing needs to develop energy platforms, improve coastal resilience, and support emergency response in the face of natural disasters. Increased investment in human-made coastal infrastructure, such as piers, support structures for power lines, offshore wind farms, and seawall protection systems, further underscores this trend. This study investigates the development of printable concrete mixtures for underwater environments using seawater as a replacement for freshwater, using a 3D printing syringe-based extrusion system. The effect of seawater addition and the printing medium (in air vs. underwater) was assessed via rheological and mechanical performance characterization. The results indicate rheological properties are favorable for seawater adoption by producing mixtures with higher yield stress and viscosity with the same levels of admixtures used for freshwater. Seawater-based mixtures demonstrated superior dimensional stability compared to freshwater counterparts, maintaining cross-sectional geometry, while compressive strength results showed no statistical differences between in-air and underwater samples. However, flexural strength was significantly influenced by geometry and printing medium. These findings establish critical rheological parameters for printable underwater mixtures and highlight the need for optimized curing strategies and layer bonding techniques to improve interfacial strength in underwater 3D printing applications.