# Valorization of waste oyster shells via thermal and acid activation for Congo red dye adsorption from aqueous media

## TL;DR

This paper presents a method to turn waste oyster shells into a low-cost, reusable material for removing Congo red dye from water.

## Contribution

A novel thermal and acid activation method is introduced to create an effective adsorbent from waste oyster shells.

## Key findings

- Modified oyster shells achieved >80–90% Congo red removal within 10 minutes.
- The adsorbent showed high capacity (qmax = 50.89 mg g−1) and durability over five cycles.
- DFT calculations confirmed strong interactions between the dye and phosphate sites.

## Abstract

A scalable route to valorize waste oyster shells into an effective adsorbent for Congo red removal is reported. Sequential thermal calcination (500 °C) and H3PO4 activation convert the CaCO3 matrix into Ca–phosphate-rich surfaces (XRD, FTIR) bearing abundant –OH/PO4 groups. Despite a moderate BET area (MOS: 22.15 m2 g−1), the modified oyster shell achieves rapid uptake (>80–90% removal within 10 min; near-complete by 60 min), broad pH tolerance with optimal performance below pHpzc ≈ 8.06, and high capacity (qmax = 50.89 mg g−1). Kinetics follow a pseudo-second-order model (R2 = 0.994; k2 = 0.0127 g mg−1 min−1) and equilibrium data fit both Freundlich (R2 = 0.997; KF = 37.19; n = 2.97) and Langmuir (KL = 4.21 L mg−1) models, indicating chemisorptive affinity on an energetically heterogeneous surface. MOS is durable and regenerable (∼95% removal after five cycles). Density functional theory calculations corroborate strong dye-phosphate site interactions. The combined thermal-acid treatment thus yields a low-cost, reusable adsorbent suitable for practical dye-laden wastewater treatment.

A scalable route to valorize waste oyster shells into an effective adsorbent for Congo red removal is reported.