# Parametrized statistical appearance and shape modelling strategy to predict proximal and diaphyseal femoral fractures

## TL;DR

This study introduces a new method to predict femoral fractures by creating patient-specific models based on height, BMI, and age, which could help in designing better orthopedic devices.

## Contribution

A novel parametric femur model that simultaneously accounts for geometry and bone density variations for whole femur fracture prediction.

## Key findings

- The parametric model predicted fracture load variations with an average difference of 4.85% compared to subject-specific models.
- The model incorporates the influence of changing patient anthropometry on femoral fractures.
- It can predict fracture loading in multiple scenarios like three-point bending and lateral falls.

## Abstract

Femoral loading leading to a fracture is known to vary with anthropometry, and patient-specific finite element models have provided important insights into fracture prediction but are often very time consuming to generate. Additionally, existing parametric models do not simultaneously account for variations in both femur geometry and bone density distribution and remain limited to either the femoral shaft or the proximal femur. This inhibits their ability to predict fractures involving both the shaft and proximal regions.

In the present study, a novel parametric femur modeling strategy was developed to create whole femur models based on stature, BMI, and age input, including density distribution and geometrical variations, for fracture loading predictions. A statistical shape and appearance femur model was developed based on an input set of CT scans of healthy female femurs (N = 18) between the ages of 50 and 70. Thereafter, multilinear regressions were used to relate principal components to the subject anthropometric characteristics and develop parametric models. The developed parametric models were evaluated using traditional patient-specific models for their potential to represent the influence of changing patient stature, BMI, and age on femoral fractures. Femoral fracture load in three-point bending, axial torsion, and lateral fall cases was predicted using the parametric as well as subject-specific femur models.

The developed parametric model was able to predict femoral fracture load variations due to changing anthropometry and age with an average difference of 4.85% compared with predictions using subject-specific models.

Therefore, this novel parametric femur model can predict fracture loading while directly incorporating the influence of changing patient anthropometry. In the future, the model could support the development of orthopedic devices tailored to specific patient anthropometries to help mitigate femoral fractures.