# Design and evaluation of carbon fabric/epoxy reinforced with reduced graphene oxide (RGO) hybrid composite for gamma ray shielding

**Authors:** Summan Urooge, Ahsan Irshad, Danish Arif, Srosh Fazil, Khurram Liaqat, Akif Safeen, Basit Ali

PMC · DOI: 10.1039/d5ra06722g · RSC Advances · 2025-11-04

## TL;DR

This study shows that adding reduced graphene oxide to carbon fabric/epoxy composites improves their ability to block gamma rays, making them good for lightweight radiation shielding.

## Contribution

The paper introduces a hybrid composite with RGO that enhances gamma-ray shielding performance compared to traditional systems.

## Key findings

- A 5 wt% RGO composite showed the highest gamma-ray attenuation efficiency due to better dispersion and higher density.
- XRD and FTIR confirmed successful integration and chemical interactions of RGO in the epoxy matrix.
- SEM analysis showed a well-bonded filler network, improving barrier properties for radiation shielding.

## Abstract

This study presents a comprehensive investigation into the gamma-ray shielding effectiveness and structural characterization of epoxy/carbon fabric composites reinforced with reduced graphene oxide (RGO) nanoparticles. A series of composite samples were fabricated with varying RGO content (0–5 wt%), and their attenuation capabilities were evaluated through experimental and computational analysis. Key radiation shielding parameters, including Mass Attenuation Coefficient (MAC), Linear Attenuation Coefficient (LAC), Half Value Layer (HVL), Tenth-Value Layer (TVL), and Mean Free Path (MFP), were determined for each sample using standard gamma sources (Cs-137, Co-60, and Ba-133) and validated against theoretical models via Phy-X/PSD and XCOM software. Structural and morphological characterization was performed using X-ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, and Scanning Electron Microscopy (SEM). Results indicated a significant enhancement in attenuation performance with increasing RGO content. Notably, sample 3, containing 5 wt% RGO, exhibited the highest attenuation efficiency, attributed to improved particle dispersion and increased density. XRD patterns confirmed successful integration of RGO within the epoxy matrix, while FTIR spectra revealed characteristic functional groups supporting chemical interactions between RGO and the polymer network. SEM analysis further demonstrated a well-bonded and homogeneously distributed filler network, contributing to enhanced barrier properties. These findings affirm the potential of epoxy/carbon fabric RGO hybrid composites as promising candidates for lightweight radiation shielding applications.

A carbon fabric/epoxy RGO hybrid composite exhibits enhanced gamma-ray shielding through synergistic nanoscale absorption and macroscale attenuation, outperforming conventional GO/polymer systems.

## Full-text entities

- **Chemicals:** carbon (MESH:D002244), Cs-137 (MESH:C024890), epoxy (MESH:D004853), polymer (MESH:D011108), Ba-133 (-)

## Full text

_Full body text omitted from this summary view._ Fetch the complete paper as Markdown: https://tomesphere.com/paper/PMC12583991/full.md

## Figures

10 figures with captions in the complete paper: https://tomesphere.com/paper/PMC12583991/full.md

## References

72 references — full list in the complete paper: https://tomesphere.com/paper/PMC12583991/full.md

---
Source: https://tomesphere.com/paper/PMC12583991