# Internet of Things Node with Real-Time LoRa GEO Satellite Connectivity for Agrifood Chain Tracking in Remote Areas

## TL;DR

A low-power IoT device with satellite connectivity is developed for tracking agrifood chains in remote areas.

## Contribution

The study introduces an IoT node prototype with direct GEO satellite communication for remote tracking.

## Key findings

- The prototype achieved a maximum EIRP of 27.5 dBm for reliable satellite communication.
- The device can transmit up to approximately 25,000 packets with a 4-cell NiMH battery pack.
- Onboard sensors measure positioning, acceleration, temperature, humidity, and solar radiation.

## Abstract

This work presents an Internet of Things (IoT) node designed for low-power agrifood chain tracking in remote areas, where long-range terrestrial communication is either unavailable or severely limited. The novelty of this study lies in the development and characterization of an IoT node prototype that leverages direct-to-satellite connectivity through a geostationary Earth orbit (GEO) satellite, using long-range frequency-hopping spread spectrum (LR-FHSS) modulation in the licensed S-band. The prototype integrates a microcontroller unit that manages both the radio modem and a suite of sensors, enclosed in a plastic box suitable for field deployment. Characterization in an anechoic chamber demonstrated a maximum effective isotropic radiated power (EIRP) of 27.5 dBm, sufficient to establish a reliable satellite link. The onboard sensors provide global positioning as well as measurements of acceleration, temperature, humidity, and solar radiation intensity. Prototype performance was assessed in two representative scenarios: stationary and mobile. Regarding energy consumption, the average charge drained by the radio modem per transmission cycle was measured to be 356 mC. With a battery pack composed of four 2500 mAh NiMH cells, the estimated upper bound on the number of transmitted packets is approximately 25,000.