# DL-AoD Estimation-Based 5G Positioning Using Directionally Transmitted Synchronization Signals

## TL;DR

This paper presents a 5G positioning method using machine learning to estimate the direction of signals from user equipment in an industrial setting, achieving better accuracy than previous experimental results.

## Contribution

The study introduces a practical, real-world 5G positioning method using standard signals and machine learning in an industrial environment without custom infrastructure.

## Key findings

- The experimental DL-AoD estimation error remained below 4° for 90% of the measurements.
- Positioning error was 13.2 m, showing practical performance in industrial settings.
- The method achieves high angular accuracy using sub-6 GHz beams without detailed antenna knowledge.

## Abstract

This paper introduces a method for estimating the Downlink Angle of Departure (DL-AoD) of 5G User Equipment (UE) from measured signal strengths of directionally transmitted synchronization signals. Based on estimated DL-AoD values, from two or more anchor nodes, the position of the UE was estimated. Unlike most prior work, which is simulation-based or relies on custom testbeds, this study uses real measurements from an operational 5G network in an industrial factory environment. A deterministic estimator was derived, but multipath and unknown beam characteristics limit its accuracy. To address this, machine learning was applied to automatically adapt to the environment. Previous simulation studies reported 90th-percentile DL-AoD estimation errors below 2°, while experimental works achieved best-case accuracies of 5–6°. In this study, the experimental DL-AoD estimation error remained below 4° for 90% of the measurements, indicating improved real-world performance. Reported positioning errors in the literature range from 3.8 m to 140 m, whereas the 13.2 m error obtained here lies near the midpoint of this range, confirming the practicality of the proposed method in industrial environments. Compared to existing approaches, this work demonstrates high angular accuracy using only sub-6 GHz beams in a realistic industrial scenario without detailed knowledge of antenna beam patterns and channel state. The findings demonstrate that standard 5G signals can provide accurate indoor localization without additional infrastructure, offering a practical path toward cost-effective positioning in industrial IoT and automation.