# Utilization of Hydrolyzed Agro-Industrial Waste from Arti-Chokes to Obtain Structurally Functional Bacterial Cellulose by Komagataeibacter rhaeticus QK23

**Authors:** Claudio Eduardo Quiñones-Cerna, Gabriela Barraza-Jáuregui, José Alfredo Cruz-Monzón, Fernando Hurtado-Butrón, Bertha Soledad Soriano-Bernilla, Diego Miguel Gutiérrez-Rodríguez, Johnny Huanes-Carranza, Wilmer Ugarte-López, Juan Carlos Rodríguez-Soto, Heber Max Robles-Castillo, Eulalio López-Quiroz, Magaly De La Cruz-Noriega

PMC · DOI: 10.3390/polym17202783 · Polymers · 2025-10-17

## TL;DR

This study shows that artichoke waste can be used to produce bacterial cellulose, a valuable biopolymer, in a sustainable and cost-effective way.

## Contribution

The novel use of hydrolyzed artichoke bract waste as a substrate for bacterial cellulose production by Komagataeibacter rhaeticus QK23 is demonstrated.

## Key findings

- Up to 11.81 g/L of reducing sugars were released from artichoke bract waste after hydrolysis.
- The highest bacterial cellulose yield of 1.57 g/L was achieved with 20% inoculum after 14 days of incubation.
- The produced cellulose had a crystallinity index of 81.87% and surface roughness of 32.96 nm.

## Abstract

Bacterial cellulose (BC) is a pure, crystalline biopolymer with broad applications, though large-scale production remains limited by the high cost of culture media. This study evaluated the use of artichoke bract waste as an alternative substrate for BC production by Komagataeibacter rhaeticus QK23, focusing on culture optimization and physicochemical characterization of the resulting biopolymer. Infrared spectroscopy revealed functional groups characteristic of cellulose, hemicellulose, lignin, and inulin, along with structural sugars (glucose 24%, xylose 5.07%, arabinose 4.96%, galactose 8.81%, and mannose 1.75%). After hydrolysis with H2SO4, up to 11.81 g/L of reducing sugars were released and incorporated into Hestrin–Schramm medium lacking glucose. Using a central composite design, inoculum dose (10–20%) and incubation time (7–14 days) were optimized under static conditions at 30 °C. The highest yield (1.57 g/L) was obtained with 20% inoculum after 14 days. The product corresponded to type I cellulose with a crystallinity index of 81.87%, and AFM analysis revealed a surface roughness of 32.96 nm. The results demonstrate that artichoke hydrolysates are a viable and sustainable source for BC production, promoting agricultural waste valorization and cost reduction in industrial biotechnology.

## Linked entities

- **Chemicals:** H2SO4 (PubChem CID 1118)

## Full-text entities

- **Chemicals:** biopolymer (MESH:D001704), sugars (MESH:D000073893), H2SO4 (MESH:C033158), cellulose (MESH:D002482), lignin (MESH:D008031), inulin (MESH:D007444), arabinose (MESH:D001089), hemicellulose (MESH:C007916), xylose (MESH:D014994), Bacterial Cellulose (-), galactose (MESH:D005690), mannose (MESH:D008358), glucose (MESH:D005947)

## Full text

_Full body text omitted from this summary view._ Fetch the complete paper as Markdown: https://tomesphere.com/paper/PMC12566787/full.md

## Figures

6 figures with captions in the complete paper: https://tomesphere.com/paper/PMC12566787/full.md

## References

68 references — full list in the complete paper: https://tomesphere.com/paper/PMC12566787/full.md

---
Source: https://tomesphere.com/paper/PMC12566787