# Mechanistic Insights into m-Cresol Adsorption on Functional Resins: Surface Chemistry and Adsorption Behavior

## TL;DR

This study explores how a functional resin can effectively remove toxic m-cresol from industrial wastewater through adsorption, providing insights into the process's chemistry and efficiency.

## Contribution

The paper provides mechanistic insights into m-cresol adsorption on functional resins, combining experimental and modeling approaches to elucidate chemisorption mechanisms.

## Key findings

- A maximum adsorption capacity of 556.3 mg g−1 and 71% removal efficiency were achieved under optimized conditions.
- The pseudo-second-order model best described the adsorption kinetics, indicating chemisorption.
- Thermodynamic analysis showed the process was spontaneous, endothermic, and entropy-favored.

## Abstract

The removal of high-concentration m-cresol from industrial wastewater remains a significant challenge due to its toxicity and persistence. In this study, a commercially available functionalized resin with a high BET surface area (1439 m2 g−1) and hierarchical pore structure was employed for the adsorption of pure m-cresol at an initial concentration of 20 g L−1, representative of coal-based industrial effluents. Comprehensive characterization confirmed the presence of oxygen-rich functional groups, amorphous polymeric structure, and uniform surface morphology conducive to adsorption. Batch experiments were conducted to evaluate the effects of resin dosage, contact time, temperature, and equilibrium concentration. Under optimized conditions (0.15 g resin, 60 °C), a maximum adsorption capacity of 556.3 mg g−1 and removal efficiency of 71% were achieved. Kinetic analysis revealed that the pseudo-second-order model best described the adsorption process (R2 > 0.99). Isotherm data fit the Langmuir model most closely (R2 = 0.9953), yielding a monolayer capacity of 833.3 mg g−1. Thermodynamic analysis showed that adsorption was spontaneous (ΔG° < 0), endothermic (ΔH° = 7.553 kJ mol−1), and accompanied by increased entropy (ΔS° = 29.90 J mol−1 K−1). The good agreement with the PSO model is indicative of chemisorption, as supported by other lines of evidence, including thermodynamic parameters (e.g., positive ΔH° and ΔS°), surface functional group characteristics, and molecular interactions. The adsorption mechanism was elucidated through comprehensive modeling of adsorption kinetics, isotherms, and thermodynamics, combined with detailed physicochemical characterization of the resin prior to adsorption, reinforcing the mechanistic understanding of m-cresol–resin interactions.