# The Fabrication of Porous Al2O3 Ceramics with Ultra-High Mechanical Strength and Oil Conductivity via Reaction Bonding and the Addition of Pore-Forming Agents

## TL;DR

Researchers created strong, oil-conductive porous ceramics using a new method that combines reaction bonding and pore-forming agents for better atomizer performance.

## Contribution

A novel fabrication method for porous Al2O3 ceramics that simultaneously enhances mechanical strength and oil conductivity.

## Key findings

- Bimodal pores improved mechanical strength by enhancing bonding force and oil-conduction channels.
- The ceramics achieved 58.2% open porosity with 7.9 MPa compressive strength and 2.1 mg·s−1 oil conductivity.
- The method overcomes the trade-off between strength and oil conductivity in atomizer applications.

## Abstract

Reaction bonding (RB) using Al powder is an effective method for preparing porous ceramics with low shrinkage, high porosity, and high strength. However, it remains challenging to optimize mechanical strength and oil conductivity simultaneously for atomizer applications. Herein, aiming at addressing this issue, porous Al2O3 ceramics with ultra-high mechanical strength and oil conductivity were fabricated via the RB process using polymethyl methacrylate (PMMA) microspheres as the pore-forming agent. The pore structure was gradually optimized by regulating the additive amount, particle size, and particle gradation of PMMA microspheres. The bimodal pores, formed by Al oxidation-induced hollow structures (enhancing bonding force) and burnout of large-sized PMMA microspheres, significantly improved mechanical strength; meanwhile, three-dimensional interconnected pores derived from particle gradation increased the diversity and quantity of oil-conduction channels, boosting oil conductivity. Consequently, under an open porosity of 58.2 ± 0.1%, a high compressive strength of 7.9 ± 0.3 MPa (a 54.7% improvement) and an excellent oil conductivity of 2.1 ± 0.0 mg·s−1 (a 46.5% improvement) were achieved. This superior performance combination, overcoming the trade-off between strength and oil conductivity, demonstrates substantial application potential in atomizers.