# Sugar Alcohols as Crosslinking Delay Additives for Fracturing Fluids

## TL;DR

This paper explores using sugar alcohols as safer, environmentally friendly additives in high-temperature fracturing fluids for oil and gas extraction.

## Contribution

The study introduces sugar alcohols as a novel, non-toxic alternative to conventional additives in high-temperature fracturing fluids.

## Key findings

- Sugar alcohols effectively delayed crosslinking and improved fluid stability at 300 °F.
- Optimized systems achieved peak viscosities of 600 cP and maintained stability for 90 minutes.
- Proppant suspension exceeded 95% during the treatment window, indicating good performance.

## Abstract

The development of thermally stable fracturing fluids is essential for the effective stimulation of deep and low-permeability reservoirs. The stabilizing additives used in these fluids typically fall into three categories: crosslinking delay molecules, oxygen scavengers, and pH buffers. However, many conventional additives raise toxicity and environmental concerns, prompting the search for safer alternatives. This study investigates the use of sugar alcohols, commonly used as low-calorie sweeteners, as environmentally responsible additives for high-temperature fracturing fluids. A guar-based fluid system was formulated at a pH of 10 and evaluated using a high-pressure high-temperature (HPHT) rheometer under simulated field pumping conditions at 300 °F for a 90 min period. The viscosity was measured at a shear rate of 100 s−1, with intermittent low-shear rates introduced to assess the structural recovery and fluid integrity. The effect of sugar alcohol concentration on crosslinking delay was examined across systems containing varying amounts of a zirconium-based crosslinker ranging from 1 to 4 gpt. The results demonstrated that sugar alcohols effectively delayed crosslinking, allowing for controlled viscosity development and improved stability at elevated temperatures. When optimized at concentrations of 2 ppt of the sugar alcohol with 4 gpt of the crosslinker, the fluid generated a peak viscosity of 600 cP after 2.5 min and maintained a viscosity above 300 cP throughout the 90 min test. Breaker results showed a controlled viscosity reduction, with final viscosity values reaching 10 cP. The proppant settling experiments confirmed the suspension of more than 95% of the proppant during the treatment window. These findings highlight the potential of sugar alcohols as effective and environmentally safer crosslinking delay additives for hydraulic fracturing applications.