# Mechanical and Failure Behavior of Soft-Hard Composite Rock with Three Parallel Joints Under Uniaxial Loading: Insights Based on AE and DIC Techniques

## TL;DR

This study examines how joint angles affect the mechanical behavior and failure of composite rocks under uniaxial loading using AE and DIC techniques.

## Contribution

The study reveals how joint angles influence crack initiation and failure modes in soft-hard composite rocks.

## Key findings

- Mechanical parameters show a V-shape trend with joint angle, minimized at 30°.
- Failure modes transition from tensile to shear to intact as joint angles change.
- Crack initiation mechanisms vary with joint angles, influenced by direct and indirect tensile displacement fields.

## Abstract

Jointed soft-hard composite rocks are frequently encountered in nature, and this complex structure contributes to unpredictable fracturing mechanisms and failure behavior. In this study, soft-hard composite rocks with three joints were fabricated to conduct a uniaxial loading experiment, supplemented by Digital Image Correlation (DIC) and Acoustic Emission (AE) experiments. The results indicate that the mechanical parameters display a V-shape variation trend with the increase of joint angle, which minimized at 30°. The peak strength ranges from 33.48 MPa to 44.93 MPa. The failure characteristics change from tensile failure to shear failure and finally to intact failure. According to the displacement curves on both sides of the crack, the initiation of wing cracks is driven by the direct tensile displacement field and indirect tensile displacement field for specimens with joint angles of 0–30° and 75–90°, respectively. While the crack initiation from joint tips corresponding to specimens with a joint angle of 45–60° is controlled by direct and indirect tensile displacement fields. Wherein the cracks initiate from the coplanar joint in the hard layer, driven by the indirect tensile displacement field, and the cracks expanding upward from other joint tips are more susceptible to the indirect tensile displacement field.