# KOH-Assisted Molten Salt Route to High-Performance LiNi0.5Mn1.5O4 Cathode Materials

## TL;DR

A new, low-cost method using KOH in a molten salt process creates high-performance LiNi0.5Mn1.5O4 for lithium-ion batteries.

## Contribution

A KOH-assisted molten salt synthesis method is introduced for high-performance LiNi0.5Mn1.5O4 cathode materials.

## Key findings

- KOH-assisted synthesis improves crystal structure and grain refinement in LiNi0.5Mn1.5O4.
- The material shows high initial specific capacities at 0.2 C and 3 C.
- It retains 85.0% and 95.70% of capacity after 200 and 100 cycles, respectively.

## Abstract

A simple and cost-effective route based on a KOH-assisted molten salt method is designed here to synthesize LiNi0.5Mn1.5O4 spinel. Pure-phase LiNi0.5Mn1.5O4 can be successfully prepared using chlorides as raw materials and adding KOH at 700 °C. The structure, morphology, and performance are discussed in detail. The measurements reveal that using KOH-assisted synthesis can optimize the crystal structure of the obtained LiNi0.5Mn1.5O4 samples, resulting in grain refinement while maintaining the predominantly octahedral structure that grows along the (111) crystal plane. This new synthesis pathway provides excellent performance in terms of cycle life. Electrochemical tests show that the KOH-assisted sample exhibits higher initial specific capacities (124.1 mAh·g−1 at 0.2 C and 111.4 mAh·g−1 at 3 C) and superior cycling performances (capacity retention of 85.0% after 200 cycles at 0.2 C and 95.70% after 100 cycles at 3 C). This provides a potential solution for the practical application of high-voltage LiNi0.5Mn1.5O4 lithium-ion batteries.