# Leaf on a Film: Mesoporous Silica-Based Epoxy Composites with Superhydrophobic Biomimetic Surface Structure as Anti-Corrosion and Anti-Biofilm Coatings

## TL;DR

Researchers created a superhydrophobic coating using epoxy and silica composites inspired by plant leaves, which effectively prevents corrosion and biofilm formation.

## Contribution

The novelty lies in using a biomimetic leaf-inspired structure in mesoporous silica-based epoxy composites to achieve high anti-corrosion and anti-biofilm properties.

## Key findings

- The biomimetic composite achieved a superhydrophobic contact angle of 152°, significantly higher than the non-biomimetic version.
- The composite showed ~99% anti-corrosion efficiency and 82% antimicrobial efficacy.
- The surface structure was successfully transferred using a PDMS-based nano-casting technique.

## Abstract

In this study, a series of amine-modified mesoporous silica (AMS)-based epoxy composites with superhydrophobic biomimetic structure surface of Xanthosoma sagittifolium leaves (XSLs) were prepared and applied as anti-corrosion and anti-biofilm coatings. Initially, the AMS was synthesized by the base-catalyzed sol–gel reaction of tetraethoxysilane (TEOS) and triethoxysilane (APTES) through a non-surfactant templating route. Subsequently, a series of AMS-based epoxy composites were prepared by performing the ring-opening polymerization of DGEBA with T-403 in the presence of AMS spheres, followed by characterization through FTIR, TEM, and CA. Furthermore, a nano-casting technique with polydimethylsiloxane (PDMS) as the soft template was utilized to transfer the surface pattern of natural XSLs to AMS-based epoxy composites, leading to the formation of AMS-based epoxy composites with biomimetic structure. From a hydrophilic CA of 69°, the surface of non-biomimetic epoxy significantly increased to 152° upon introducing XSL surface structure to the AMS-based epoxy composites. Based on the standard electrochemical anti-corrosion and anti-biofilm measurements, the superhydrophobic BEAMS3 composite was found to exhibit a remarkable anti-corrosion efficiency of ~99% and antimicrobial efficacy of 82% as compared to that of hydrophilic epoxy coatings.