# Investigations on the Impact of a Series of Alkoxysilane Precursors on the Structure, Morphology and Wettability of an Established Zirconium-Modified Hybrid Anticorrosion Sol–Gel Coating

## TL;DR

This study examines how different alkoxysilane additives affect the structure and water resistance of a zirconium-based sol-gel coating used for corrosion protection.

## Contribution

The novelty lies in systematically evaluating how various functional alkoxysilanes influence the coating's structure, morphology, and wettability.

## Key findings

- Functional alkoxysilanes form core–shell nanoparticles on the sol–gel surface.
- Hydrophobic properties decrease with higher curing temperatures due to reduced surface roughness.
- Alkoxysilane incorporation modifies the sol–gel structure and surface characteristics effectively.

## Abstract

The current study reports on the impact of a series of functional alkoxysilanes on the wettability and structure of a well-established silicon/zirconium hybrid anticorrosion sol–gel coating. The selected functional alkoxysilanes comprise tetra ethylorthosilicate (TEOS), 3-glycidyloxypropyltrimethoxysilane (GPTMS), 3-aminopropyltriethoxysilane (APTES) and vinyltriethoxysilane (VTES) and are incorporated at various concentrations (1, 5, 10 and 20%) within the silicon/zirconium sol–gel material. The prepared materials are successfully processed as coatings and cured at different temperatures in the range of 100–150 °C. The characterisation of the structures and surfaces is performed by dynamic light scattering (DLS), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), silicon nuclear magnetic resonance spectroscopy (29Si-NMR), atomic force microscopy (AFM) and static water contact angle (WCA). Structural characterisations (DLS, FTIR,29Si-NMR) show that the functional alkoxysilanes effectively bind at the surface of the reference sol–gel material, resulting in the formation of functional core–shell nanoparticles. WCA results show that the hydrophobic properties of all materials decrease with curing temperature, and AFM analysis demonstrated that this behaviour is associated with a decrease in roughness. The physico-chemical processes taking place are critically assigned and discussed.