# Engineering Nano-Sized Silicon Anodes with Conductive Networks toward a High Average Coulombic Efficiency of 90.2% via Plasma-Assisted Milling

## TL;DR

Researchers developed a plasma-assisted method to create nano-sized silicon anodes with conductive networks, achieving high Coulombic efficiency and improved battery performance.

## Contribution

A novel plasma-assisted milling technique is introduced to synthesize nano-sized silicon anodes with enhanced conductivity and structural stability.

## Key findings

- Nano-sized Si anodes with CNT networks achieved an average Coulombic efficiency of 90.2%.
- The C-PMSi-50:1 anode delivered 615 mAh g−1 after 100 cycles and 979 mAh g−1 at 5 A g−1.
- The Si||LiNi0.8Co0.1Mn0.1O2 pouch cell maintained an ICE of >85%.

## Abstract

Si-based anode is considered one of the ideal anodes for high energy density lithium-ion batteries due to its high theoretical capacity of 4200 mAh g−1. To accelerate the commercial progress of Si material, the multi-issue of extreme volume expansion and low intrinsic electronic conductivity needs to be settled. Herein, a series of nano-sized Si particles with conductive networks are synthesized via the dielectric barrier discharge plasma (DBDP) assisted milling. The p-milling method can effectively refine the particle sizes of pristine Si without destroying its crystal structure, resulting in large Brunauer–Emmett–Teller (BET) values with more active sites for Li+ ions. Due to their unique structure and flexibility, CNTs can be uniformly distributed among the Si particles and the prepared Si electrodes exhibit better structural stability during the continuous lithiation/de-lithiation process. Moreover, the CNT network accelerates the transport of ions and electrons in the Si particles. As a result, the nano-sized Si anodes with CNTs conductive network can deliver an extremely high average initial Coulombic efficiency (ICE) reach of 90.2% with enhanced cyclic property and rate capability. The C-PMSi-50:1 anode presents 615 mAh g−1 after 100 cycles and 979 mAh g−1 under the current density of 5 A g−1. Moreover, the manufactured Si||LiNi0.8Co0.1Mn0.1O2 pouch cell maintains a high ICE of >85%. This work may supply a new insight for designing the nano-sized Si and further promoting its commercial applications.