# Hydrogenolysis of Glycerol over NiCeZr Catalyst Modified with Mg, Cu, and Sn at the Surface Level

**Authors:** Norberto Vera-Hincapie, Unai Iriarte-Velasco, Jose Luis Ayastuy, Miguel Ángel Gutiérrez-Ortiz

PMC · DOI: 10.3390/ijms25063484 · International Journal of Molecular Sciences · 2024-03-20

## TL;DR

This paper studies how modifying a catalyst with Mg, Cu, and Sn affects glycerol conversion into valuable products like hydrogen and methane, aiming to improve sustainability.

## Contribution

The study introduces surface-level modifications of Ni-Ce-Zr catalysts with Mg, Cu, and Sn to enhance glycerol hydrogenolysis efficiency.

## Key findings

- Surface modification reduced global glycerol conversion due to fewer available metal sites.
- Cu- and Sn-doped catalysts produced more liquid products like 1,2-PG due to increased acidity.
- Cu and Sn reduced catalyst deactivation caused by leaching.

## Abstract

Biomass valorization is an essential strategy for converting organic resources into valuable energy and chemicals, contributing to the circular economy, and reducing carbon footprints. Glycerol, a byproduct of biodiesel production, can be used as a feedstock for a variety of high-value products and can contribute to reducing the carbon footprint. This study examines the impact of surface-level modifications of Mg, Cu, and Sn on Ni-Ce-Zr catalysts for the hydrogenolysis of glycerol, with in situ generated hydrogen. The aim of this approach is to enhance the efficiency and sustainability of the biomass valorization process. However, the surface modification resulted in a decrease in the global conversion of glycerol due to the reduced availability of metal sites. The study found that valuable products, such as H2 and CH4 in the gas phase, and 1,2-PG in the liquid phase, were obtained. The majority of the liquid fraction was observed, particularly for Cu- and Sn-doped catalysts, which was attributed to their increased acidity. The primary selectivity was towards the cleavage of the C–O bond. Post-reaction characterizations revealed that the primary causes of deactivation was leaching, which was reduced by the inclusion of Cu and Sn. These findings demonstrate the potential of Cu- and Sn-modified Ni-Ce-Zr catalysts to provide a sustainable pathway for converting glycerol into value-added chemicals.

## Linked entities

- **Chemicals:** glycerol (PubChem CID 753), H2 (PubChem CID 783), CH4 (PubChem CID 297)

## Full-text entities

- **Chemicals:** Mg (MESH:D008274), H2 (MESH:D006859), 1,2-PG (-), Cu (MESH:D003300), metal (MESH:D008670), Sn (MESH:D014001), carbon (MESH:D002244), Glycerol (MESH:D005990), Ce (MESH:D002563), Ni (MESH:D009532), CH4 (MESH:D008697), Zr (MESH:D015040)

## Full text

_Full body text omitted from this summary view._ Fetch the complete paper as Markdown: https://tomesphere.com/paper/PMC10970669/full.md

## Figures

9 figures with captions in the complete paper: https://tomesphere.com/paper/PMC10970669/full.md

## References

90 references — full list in the complete paper: https://tomesphere.com/paper/PMC10970669/full.md

---
Source: https://tomesphere.com/paper/PMC10970669