All-organic self-separating three-dimensionally nanoarchitected electrochemical energy storage devices

TL;DR

This paper presents the first all-organic, self-separating 3D nanoarchitected lithium-ion energy storage device, utilizing a monolithic carbon anode and electropolymerized cathode, with promising capacity results.

Contribution

It introduces a novel all-organic 3D nanoarchitected energy storage device with self-separating capabilities, a first in the field.

Findings

Achieved a discharge capacity of 267 mAh/g.

Demonstrated the first all-organic 3D nanoarchitected EES device.

Generalized the design to other co-continuous carbon structures.

Abstract

This work realizes a three-dimensionally (3D) nanoarchitected, all organic, "self-separating" lithium-ion electrochemical energy storage (EES) device that is cycled as a solid-state full cell. The device is enabled by a monolithic carbon anode with a co-continuous pore network, derived from the structure direction of resols by an ultra-large molar mass block copolymer (BCP), poly(styrene-block-2-dimethylaminoethyl methacrylate) (SA). Electropolymerization of a single-phase conductive and redox-active material, poly((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methyl 9,10-dioxo-9,10-dihydroanthracene-2-carboxylate) (PAQEDOT), into the pore space provides the cathode of the cell. The device is electronically contacted to the relevant electrode network enabled by the co-continuous nature of each electrode. Electrochemical processing via cycling against external lithium in an electrolyte generates a solid electrolyte interphase (SEI) as a separator and lithiates the cell electrodes, after which the EES device is cycled in the solid state. While the full cell does not demonstrate high cyclability, the best full cell demonstrates a discharge capacity of 267 milliamp hours per gram (mAh/g). This work marks, to the best of knowledge of the authors, the first example of an all-organic materials derived 3D nanoarchitected EES device, as well as the first design of "self-separating" cell fabrication. Furthermore, generalization of the design to another co-continuous carbon form factor is demonstrated.