Characterization and Correlation of Robotic Snake Scale Friction and Locomotion Speed

TL;DR

This study investigates how the frictional properties of snake robot scales influence locomotion speed across various surfaces, introducing a modular scale design and measuring frictional anisotropy at different angles.

Contribution

The paper presents a novel modular pseudo-skin design for snake robots and provides experimental data on scale frictional anisotropy at multiple angles and surfaces.

Findings

Frictional coefficients vary with scale angle and surface.

No consistent correlation found between frictional ratios and locomotion speed.

Frictional ratios alone may not predict snake robot speed.

Abstract

Snake robots are inspired by the ability of biological snakes to move over rock, grass, leaves, soil, up trees, along pavement and more. Their ability to move in multiple distinct environments is due to their legless locomotion strategy, which combines distinct gaits with a skin that exhibits frictional anisotropy. Designing soft robotic snakes with similar capabilities requires an understanding of how this underlying frictional anisotropy should be created in engineered systems, and how variances in the frictional anisotropy ratio affect locomotion speed and direction on different surfaces. While forward and backward frictional ratios have been characterized for previous scale designs, lateral friction and the associated ratios are often overlooked. In this paper, our contributions include: (i) the development of a novel articulated pseudo-skin design that is modular, easy to construct and has removable or replaceable scales; (ii) experimental measurement of the frictional characteristics of otherwise-identical scales at varying angles of attack (15{\deg}, 25{\deg}, 35{\deg}, 45{\deg}) on different surfaces of interest (grass, bark, smooth surface, carpet);(iii) separate measurements of locomotion speed for each angle and surface. Consequently, while we observed some consistent trends between frictional coefficients and scale angle, aligning with literature and intuition, we were not able to consistently identify expected correlations between frictional ratios and locomotion speed. We conclude that either frictional ratios alone are not sufficient to predict the observed speed of a snake robot, or that specific measurement approaches are required to accurately capture these ratios.