Discrete Dislocation Dynamics Modeling of Nanotwinned Materials: Orientation Effects in a Multilayer Twinned Structure of Copper

TL;DR

This study uses a 3D discrete dislocation dynamics model to explore how orientation affects deformation in nanotwinned copper with multilayer structures, revealing orientation-dependent stress responses and dislocation behaviors.

Contribution

It introduces a novel dislocation-twin boundary interaction model into DDD simulations to analyze orientation effects in multilayer nanotwinned copper structures.

Findings

Stress-strain response varies with loading orientation.

Dislocation behavior depends on the angle relative to twin boundaries.

Microstructure influences hardening and plastic flow stability.

Abstract

The impact of twin boundaries (TBs) on the microstructure evolution and plastic deformation mechanisms of face-centered cubic (FCC) metals has been extensively studied since the discovery that nanotwinned materials exhibit a favorable combination of high strength and ductility. In this work, a dislocation-twin boundary interaction model for copper is incorporated into a three-dimensional discrete dislocation dynamics (DDD) framework. This approach is applied to systematically investigate the orientation effects on the deformation of nanotwinned copper, utilizing a multilayer twinned structure (MTS) with a twin thickness of 160 nm. The simulation results show that the stress-strain response of MTSs under uniaxial loading depends significant on the orientation of the loading axis. Dislocations inclined to TBs are confined to slip in single- or multi-layer twin lamellae; when the loading axis is oriented perpendicular or parallel to TBs, such whereas when loading axis inclined to TBs, the dislocations with glide plane parallel to TBs are easily activated (mainly twinning dislocations) and the TBs do not hinder the dislocations and behave in soft modes. If the hard mode dominates the deformation mechanism, microstructures with single-layer confined slip lead to significant hardening behavior, while microstructures with multilayer confined slip maintain stable plastic flow and do not lead to hardening. Finally, through the introduction of critical resolved shear stresses (CRSSs) specific to various deformation modes and the adaptation of Schmid's law, we have effectively projected the additional anisotropic characteristics induced by TBs in MTSs.