The CCOR Compact Coronagraphs for the Geostationary Operational Environmental Satellite-19 (GOES-19) and the Space Weather Follow On (SWFO) Missions

TL;DR

The CCOR Compact Coronagraphs are compact, high-performance solar coronagraphs designed for NOAA satellites to detect and track CMEs, enhancing space weather prediction capabilities with reduced size and comparable performance to larger predecessors.

Contribution

This paper introduces the design, implementation, and operational deployment of the CCOR series of compact coronagraphs for NOAA satellites, offering a smaller yet effective alternative to traditional coronagraphs.

Findings

CCOR-1 on GOES-U launched in 2024; CCOR-2 on SWFO-L1 scheduled for 2025.

Both instruments have a field of view similar to SOHO LASCO C3.

Compact design reduces size and mass with acceptable signal-to-noise ratio.

Abstract

The CCOR Compact Coronagraph is a series of two operational solar coronagraphs sponsored by the National Oceanic and Atmospheric Administration (NOAA). They were designed, built, and tested by the U.S. Naval Research Laboratory (NRL). The CCORs will be used by NOAA's Space Weather Prediction Center to detect and track Coronal Mass Ejections (CMEs) and predict the Space Weather. CCOR-1 is on board the Geostationary Operational Environmental Satellite -U (GOES-U, now GOES-19/GOES-East). GOES-U was launched from Kennedy Space Flight Center, Florida, on 25 June 2024. CCOR-2 is on board the Space Weather Follow On at Lagrange point 1 (SWFO-L1). SWFO-L1 is scheduled to launch in the fall of 2025. SWFO will be renamed SOLAR-1 once it reaches L1. The CCORs are white-light coronagraphs that have a field of view and performance similar to the SOHO LASCO C3 coronagraph. CCOR-1 FOV spans from 4 to 22 Rsun, while CCOR-2 spans from 3.5 to 26 Rsun. The spatial resolution is 39 arcsec for CCOR-1 and 65 arcsec for CCOR-2. They both operate in a band-pass of 470 - 740 nm. The synoptic cadence is 15 min and the latency from image capture to the forecaster on the ground is less than 30 min. Compared to past generation coronagraphs such as the Large Angle and Spectrometric Coronagraph (LASCO), CCOR uses a compact design; all the solar occultation is done with a single multi-disk external occulter. No internal occulter is used. This allowed a substantial reduction in size and mass compared to SECCHI COR-2, for example, but with slightly lower signal-to-noise ratio. In this article, we review the science that the CCORs will capitalize on for the purpose of operational space weather prediction. We give a description of the driving requirements and accommodations, and provide details on the instrument design. In the end, information on ground processing and data levels is provided.