Adaptive Learned Belief Propagation for Decoding Error-Correcting Codes

TL;DR

This paper introduces an adaptive weighted belief propagation decoding method that dynamically adjusts weights for each received word, significantly improving error correction performance over static methods in various coding scenarios.

Contribution

The paper presents a novel adaptive WBP decoder that determines weights per received word using two variants, enhancing decoding accuracy without increasing complexity.

Findings

Adaptive WBP achieves up to tenfold reduction in BER compared to static WBP.

Significant coding gain of 0.8 dB over neural min-sum decoder in optical fiber applications.

Adaptive decoders outperform static counterparts across multiple code types and channel conditions.

Abstract

Weighted belief propagation (WBP) for the decoding of linear block codes is considered. In WBP, the Tanner graph of the code is unrolled with respect to the iterations of the belief propagation decoder. Then, weights are assigned to the edges of the resulting recurrent network and optimized offline using a training dataset. The main contribution of this paper is an adaptive WBP where the weights of the decoder are determined for each received word. Two variants of this decoder are investigated. In the parallel WBP decoders, the weights take values in a discrete set. A number of WBP decoders are run in parallel to search for the best sequence of weights in real time. In the two-stage decoder, a small neural network is used to dynamically determine the weights of the WBP decoder for each received word. The proposed adaptive decoders demonstrate significant improvements over the static counterparts in two applications. In the first application, Bose-Chaudhuri-Hocquenghem, polar and quasi-cyclic low-density parity-check (QC-LDPC) codes are used over an additive white Gaussian noise channel. The results indicate that the adaptive WBP achieves bit error rates (BERs) up to an order of magnitude less than the BERs of the static WBP at about the same decoding complexity, depending on the code, its rate, and the signal-to-noise ratio. The second application is a concatenated code designed for a long-haul nonlinear optical fiber channel where the inner code is a QC-LDPC code and the outer code is a spatially coupled LDPC code. In this case, the inner code is decoded using an adaptive WBP, while the outer code is decoded using the sliding window decoder and static belief propagation. The results show that the adaptive WBP provides a coding gain of 0.8 dB compared to the neural normalized min-sum decoder, with about the same computational complexity and decoding latency.