Nd3+ Doping-induced Leakage Currents Suppression in High-temperature 0.7BiFeO3-0.3BaTiO3 Lead-free Piezoceramics

TL;DR

This study demonstrates that Nd3+ doping in 0.7BiFeO3-0.3BaTiO3 ceramics significantly reduces leakage currents and enhances high-temperature stability, improving their suitability for high-temperature piezoelectric applications.

Contribution

The paper introduces Nd3+ doping as an effective method to suppress leakage currents and improve high-temperature performance of lead-free BF-BT piezoceramics.

Findings

Leakage current density reduced by over 99%.

Enhanced resistivity and thermal stability at high temperatures.

Piezoelectric coefficient up to 172 pC/N at room temperature.

Abstract

BiFeO3 has attracted much attention as a potential candidate for replacing conventional, lead based piezoelectric materials due to its remarkable spontaneous polarization and high Curie temperature. However, its inherent high leakage currents, which lead to low piezoelectric response and poor temperature stability, have severely limited its practical applications. In this study, lead free piezoelectric ceramics of the 0.7BiFeO3-0.3BaTiO3 (BF-BT) system were prepared, and their microstructures along with high-temperature electrical performance were modulated by introducing Nd3+. The results indicate that moderate Nd doping improves lattice symmetry and reduces oxygen vacancy-related defect dipoles, thereby effectively suppressing leakage currents at temperatures above 75{\deg}C. The Nddoped samples exhibit significantly lower leakage current densities, reduced by over 99% compared to the undoped ceramics, reaching values as low as 10-5Acm-2. They also show higher resistivity under elevated temperatures and electric fields, offering notable improvements in thermal stability over the undoped counterparts. In addition, the Nd-doped samples achieved piezoelectric coefficients as high as 172 pC N -1 at room temperature while still maintaining high dielectric and piezoelectric responses at elevated temperatures. This work not only provides an effective way to solve the leakage current problem of BF-BT ceramics in high temperature applications but also indicates a new design strategy for optimizing the high temperature stability of lead free piezoelectric materials, which shows a broad application prospect in the field of high-temperature sensors and actuators.