Frequency-stable nanophotonic microcavities via integrated thermometry

TL;DR

This paper presents an integrated thermometry technique for stabilizing high-Q microresonators on silicon chips, significantly reducing frequency drift and enabling stable, long-term operation of photonic devices like lasers and Kerr combs.

Contribution

The authors introduce a novel integrated resistance thermometer for microresonator temperature stabilization, achieving sub-picometer wavelength accuracy and enhanced frequency stability over days.

Findings

Achieved <0.8 pm wavelength error over days

Reduced laser frequency drift by 48x

Stabilized Kerr comb without photodetection

Abstract

Field-deployable integrated photonic devices co-packaged with electronics will enable important applications such as optical interconnects, quantum information processing, precision measurements, spectroscopy, and microwave generation. Significant progress has been made over the past two decades on increasing the functional complexity of photonic chips. However, a critical challenge that remains is the lack of scalable techniques to overcome thermal perturbations arising from the environment and co-packaged electronics. Here, we demonstrate a fully integrated scheme to monitor and stabilize the temperature of a high-Q microresonator on a Si-based chip, which can serve as a photonic frequency reference. Our approach relies on a thin-film metallic resistor placed directly above the microcavity, acting as an integrated resistance thermometer, enabling unique mapping of the cavity's absolute resonance wavelength to the thermometer's electrical resistance. Following a one-time calibration, the microresonator can be accurately and repeatably tuned to any desired absolute resonance wavelength using thermometry alone with a root-mean squared wavelength error of <0.8 pm over a timespan of days. We frequency-lock a distributed feedback (DFB) laser to the microresonator and demonstrate a 48x reduction in its frequency drift, resulting in its center wavelength staying within +-0.5 pm of the mean over the duration of 50 hours in the presence of significant ambient fluctuations, outperforming many commercial DFB and wavelength-locker-based laser systems. Finally, we stabilize a soliton mode-locked Kerr comb without the need for photodetection, paving the way for Kerr-comb-based photonic devices that can potentially operate in the desired mode-locked state indefinitely.