Multi-Momentum Observer Contact Estimation for Bipedal Robots

TL;DR

This paper introduces a novel momentum observer-based method for estimating foot contact modes in bipedal robots without relying on contact sensors, enhancing reliability and accuracy in dynamic and noisy environments.

Contribution

The paper proposes a new contact mode estimation technique using multiple dynamic models and a Markov fusion approach, avoiding the limitations of contact sensors.

Findings

Achieves up to 98.44% contact detection accuracy in simulations.

Attains 77.12% accuracy on real robot data.

Provides a robust method for contact estimation without dedicated sensors.

Abstract

As bipedal robots become more and more popular in commercial and industrial settings, the ability to control them with a high degree of reliability is critical. To that end, this paper considers how to accurately estimate which feet are currently in contact with the ground so as to avoid improper control actions that could jeopardize the stability of the robot. Additionally, modern algorithms for estimating the position and orientation of a robot's base frame rely heavily on such contact mode estimates. Dedicated contact sensors on the feet can be used to estimate this contact mode, but these sensors are prone to noise, time delays, damage/yielding from repeated impacts with the ground, and are not available on every robot. To overcome these limitations, we propose a momentum observer based method for contact mode estimation that does not rely on such contact sensors. Often, momentum observers assume that the robot's base frame can be treated as an inertial frame. However, since many humanoids' legs represent a significant portion of the overall mass, the proposed method instead utilizes multiple simultaneous dynamic models. Each of these models assumes a different contact condition. A given contact assumption is then used to constrain the full dynamics in order to avoid assuming that either the body is an inertial frame or that a fully accurate estimate of body velocity is known. The (dis)agreement between each model's estimates and measurements is used to determine which contact mode is most likely using a Markov-style fusion method. The proposed method produces contact detection accuracy of up to 98.44% with a low noise simulation and 77.12% when utilizing data collect on the Sarcos Guardian XO robot (a hybrid humanoid/exoskeleton).