Enforcing Mesh Quality Constraints in Shape Optimization with a Gradient Projection Method

TL;DR

This paper introduces a gradient projection method to enforce minimum mesh quality constraints during shape optimization, ensuring mesh integrity in complex geometries without frequent remeshing.

Contribution

It presents a novel semi-discrete approach based on Rosen's gradient projection method to maintain mesh quality constraints during shape optimization.

Findings

Successfully applied to 2D and 3D problems

Guarantees minimum mesh quality throughout optimization

Effective in industrial and academic scenarios

Abstract

For the numerical solution of shape optimization problems, particularly those constrained by partial differential equations (PDEs), the quality of the underlying mesh is of utmost importance. Particularly when investigating complex geometries, the mesh quality tends to deteriorate over the course of a shape optimization so that either the optimization comes to a halt or an expensive remeshing operation must be performed before the optimization can be continued. In this paper, we present a novel, semi-discrete approach for enforcing a minimum mesh quality in shape optimization. Our approach is based on Rosen's gradient projection method, which incorporates mesh quality constraints into the shape optimization problem. The proposed constraints bound the angles of triangular and solid angles of tetrahedral mesh cells and, thus, also bound the quality of these mesh cells. The method treats these constraints by projecting the search direction to the linear subspace of the currently active constraints. Additionally, only slight modifications to the usual line search procedure are required to ensure the feasibility of the method. We present our method for two- and three-dimensional simplicial meshes. We investigate the proposed approach numerically for the drag minimization of an obstacle in a two-dimensional Stokes flow, the optimization of the flow in a pipe governed by the Navier-Stokes equations, and for the large-scale, three-dimensional optimization of a structured packing used in a distillation column. Our results show that the proposed method is indeed capable of guaranteeing a minimum mesh quality for both academic examples and challenging industrial applications. Particularly, our approach allows the shape optimization of complex structures while ensuring that the mesh quality does not deteriorate.