Development of a Low-Cost Prosthetic Hand Using Electromyography and Machine Learning

TL;DR

This paper presents a low-cost myo-electric prosthetic hand that uses EMG signals and machine learning to classify gestures with high accuracy, incorporating additional functionalities like wrist rotation and tactile feedback.

Contribution

The study introduces a cost-effective prosthetic hand with a novel EMG signal processing and classification system, including a tactile feedback mechanism and enhanced degrees of freedom.

Findings

Achieved over 97% classification accuracy using time domain features.

Implemented a wrist rotation mechanism controlled by gestures.

Developed a tactile feedback system for force sensation.

Abstract

Electromyography (EMG) is a measure of muscular electrical activity and is used in many clinical/biomedical disciplines and modern human computer interaction. Myo-electric prosthetics analyze and classify the electrical signals recorded from the residual limb. The classified output is then used to control the position of motors in a robotic hand and a movement is produced. The aim of this project is to develop a low-cost and effective myo-electric prosthetic hand that would meet the needs of amputees in developing countries. The proposed prosthetic hand should be able to accurately classify five different patterns (gestures) using EMG recordings from three muscles and control a robotic hand accordingly. The robotic hand is composed of two servo motors allowing for two degrees of freedom. After establishing an efficient signal acquisition and amplification system, EMG signals were thoroughly analyzed in the frequency and time domain. Features were extracted from both domains and a shallow neural network was trained on the two sets of data. Results yielded an average classification accuracy of 97.25% and 95.85% for the time and frequency domains respectively. Furthermore, results showed a faster computation and response for the time domain analysis; hence, it was adopted for the classification system. A wrist rotation mechanism was designed and tested to add significant functionality to the prosthetic. The mechanism is controlled by two of the five gestures, one for each direction. Which added a third degree of freedom to the overall design. Finally, a tactile sensory feedback system which uses force sensors and vibration motors was developed to enable sensation of the force inflicted on the hand for the user.