Minimizing finite viscosity enhances relative kinetic energy absorption in bistable mechanical metamaterials but only with sufficiently fine discretization: a nonlinear dynamical size effect

TL;DR

This study demonstrates that reducing finite viscosity in bistable mechanical metamaterials can significantly improve their ability to absorb impact energy, but only when the system is discretized finely enough to approach the continuum limit.

Contribution

It reveals a nonlinear dynamical size effect in bistable metamaterials, showing optimal impact mitigation occurs at sufficiently fine discretization and finite viscosity levels.

Findings

Lower viscosity enhances energy absorption near the continuum limit.

Discretization threshold depends sharply on viscosity.

Bistable systems can perform worse than linear ones at coarse discretization.

Abstract

Bistable mechanical metamaterials have shown promise for mitigating the harmful consequences of impact by converting kinetic energy into stored strain energy, offering an alternative and potentially synergistic approach to conventional methods of attenuating energy transmission. In this work, we numerically study the dynamic response of a one-dimensional bistable metamaterial struck by a high speed impactor (where the impactor velocity is commensurate with the sound speed), using the peak kinetic energy experienced at midpoint of the metamaterial compared to that in an otherwise identical linear system as our performance metric. We make five key findings: 1) The bistable material can counter-intuitively perform better (to nearly 1000x better than the linear system) as the viscosity decreases (but remains finite), but only when sufficiently fine discretization has been reached (i.e. the system approaches sufficiently close to the continuum limit); 2) This discretization threshold is sharp, and depends on the viscosity present; 3) The bistable materials can also perform significantly worse than linear systems (for low discretization and viscosity or zero viscosity); 4) The dependence on discretization stems from the partition of energy into trains of solitary waves that have pulse lengths proportional to the unit cell size, where, with intersite viscosity, the solitary wave trains induce high velocity gradients and thus enhanced damping compared to linear, and low-unit-cell-number bistable, materials; and 5) When sufficiently fine discretization has been reached at low viscosities, the bistable system outperforms the linear one for a wide range of impactor conditions. The first point is particularly important, as it shows the existence of a nonlinear dynamical size effect, where, given a protective layer of some thickness...