Thermal spectrometer for superconducting circuits

TL;DR

This paper introduces a simple DC thermal spectrometer for superconducting circuits that can measure resonance properties over a broad frequency range up to 200 GHz without calibration, providing a new tool for quantum circuit analysis.

Contribution

The authors demonstrate a novel thermal measurement scheme using an on-chip bolometer for superconducting circuits, extending frequency measurement capabilities beyond traditional RF methods.

Findings

Achieved DC measurement of superconducting resonator properties.

Extended frequency measurement range up to 200 GHz.

Provided a calibration-free, frequency-independent absorption reference.

Abstract

Superconducting circuits provide a versatile and controllable platform for studies of fundamental quantum phenomena as well as for quantum technology applications. A conventional technique to read out the state of a quantum circuit or to characterize its properties is based on RF measurement schemes. Here we demonstrate a simple DC measurement of a thermal spectrometer to investigate properties of a superconducting circuit, in this proof-of-concept experiment a coplanar waveguide resonator. A fraction of the microwave photons in the resonator is absorbed by an on-chip bolometer, resulting in a measurable temperature rise. By monitoring the DC signal of the thermometer due to this process, we are able to determine the resonance frequency and the lineshape (quality factor) of the resonator. The demonstrated scheme, which is a simple DC measurement, offers a wide frequency band potentially reaching up to 200 GHz, far exceeding that of the typical RF spectrometer. Moreover, the thermal measurement yields a highly frequency independent reference level of the Lorentzian absorption signal. In the low power regime, the measurement is fully calibration-free. Our technique offers an alternative spectrometer for quantum circuits.