Performance evaluation of the high-voltage CMOS active pixel sensor AstroPix for gamma-ray space telescopes
Yusuke Suda, Regina Caputo, Amanda L. Steinhebel, Nicolas Striebig,, Manoj Jadhav, Yasushi Fukazawa, Masaki Hashizume, Carolyn Kierans, Richard, Leys, Jessica Metcalfe, Michela Negro, Ivan Peri\'c, Jeremy S. Perkins,, Taylor Shin, Hiroyasu Tajima, Daniel Violette, Norito Nakano

TL;DR
This paper evaluates the performance of AstroPix, a high-voltage CMOS active pixel sensor, for gamma-ray space telescopes, focusing on power consumption, pixel size, energy resolution, and radiation tolerance.
Contribution
It introduces AstroPix2 and AstroPix3 versions, demonstrating their performance metrics and suitability for next-generation gamma-ray observatories.
Findings
AstroPix3 meets the pixel size and energy resolution targets for AMEGO-X.
AstroPix3 has a dynamic range from 22.2 keV to 122.1 keV.
Radiation testing shows minimal gain decrease after exposure.
Abstract
AstroPix is a novel monolithic high-voltage CMOS active pixel sensor proposed for next generation medium-energy gamma-ray observatories like the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X). For AMEGO-X AstroPix must maintain a power consumption of less than while having a pixel pitch of up to . We developed the second and third versions of AstroPix, namely AstroPix2 and AstroPix3. AstroPix2 and AstroPix3 exhibit power consumptions of and , respectively. While AstroPix2 has a pixel pitch of , AstroPix3 achieves the desired size for AMEGO-X with a pixel pitch of . Performance evaluation of a single pixel in an AstroPix2 chip revealed a dynamic range from 13.9 keV to 59.5 keV, with the energy resolution meeting the AMEGO-X target value ( (FWHM) at 60 keV).…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
