Machine learning for characterizing uncertain elastic properties of fused filament fabricated materials for topology optimization applications

TL;DR

This paper develops a neural network model to accurately quantify the uncertain elastic properties of 3D-printed materials using surface strain data, enhancing the robustness of topology optimization designs.

Contribution

It introduces a neural network approach trained on synthetic data to estimate local elastic modulus variations in fused filament fabricated materials, accounting for process-induced variability.

Findings

High predictive accuracy with R2 scores above 0.95 for elastic modulus parameters.

Effective estimation of mean and standard deviation of elastic modulus in both bulk and fusion layers.

Validation confirms the model's reliability in real-world FFF-printed material analysis.

Abstract

The layering approach used in fused filament fabrication (FFF) enables creation of complex designs generated by topology optimization. Defects associated with the layer-by-layer process, introduce considerable random variability to the local elastic modulus of the print. The elastic modulus along the fusion layers connecting bulk materials differs from that of the bulk areas. Accurate quantitative measurements of variations in both areas are essential to achieve robust optimized designs. This study aims to quantify the parameters of the random distributions given the surface strain field of the print measured by digital image correlation (DIC). Two statistical properties, mean and standard deviation, are sufficient to characterize the stochastic elastic modulus fields in each region. An efficient neural network model is developed to estimate spatial variations in the local elastic modulus within both bulk and fusion layers. This model is trained on a dataset of synthetic strain fields with known distributions in the elastic modulus fields. It performs well in correlating the elastic modulus with the input strain, as long as the standard deviation is below 60% of the mean of the random field. The predictive accuracy of the model on testing data, measured by the R2 score, is 0.99 and 0.95 for mean and standard deviation in the fusion material. The scores for the bulk material are 0.97 each. The trained model is implemented to predict the elastic modulus distribution of an FFF-printed material at a print speed of 30 mm/s and an extrusion temperature of 493.15 K, based on its DIC-measured surface strain data. The model predicts a mean and standard deviation of 1.2 GPa and 1 GPa for the bulk material and 400 MPa and 430 MPa for the fusion region. Validation of predictions confirms the reliability of this approach in measuring uncertainty in the local properties of the prints.