Dissolution zone model of the oxide structure in additively manufactured dispersion-strengthened alloys

TL;DR

This paper develops a model for oxide structure evolution in dispersion-strengthened alloys during laser melting, linking process parameters with oxide size, distribution, and slag formation, validated by experimental data.

Contribution

It introduces a dissolution zone model that predicts oxide dispersoid size and slag formation based on melt pool dynamics and process parameters.

Findings

Dissolution zones fully dissolve oxides in the melt center.

Homogeneous dispersoid structures occur when dissolution zones overlap.

Predictions align with experimental data and explain process-structure relationships.

Abstract

The structural evolution of oxides in dispersion-strengthened superalloys during laser-powder bed fusion is considered in detail. Alloy chemistry and process parameter effects on oxide structure are assessed through a parameter study on the model alloy Ni-20Cr, doped with varying concentrations of Y2O3 and Al. A scaling analysis of mass and momentum transport within the melt pool, presented here, establishes that diffusional structural evolution mechanisms dominate for nanoscale dispersoids, while fluid forces and advection become significant for larger micron-scale slag inclusions. These findings are developed into a theory of dispersoid structural evolution, integrating quantitative models of diffusional processes -- dispersoid dissolution, nucleation, growth, coarsening -- with a reduced order model of time-temperature trajectories of fluid parcels within the melt pool. Calculations of the dispersoid size in single-pass melting reveal a zone in the center of the melt track in which the oxide feedstock fully dissolves. Within this zone the final Y2O3 size is independent of feedstock size and determined by nucleation and growth kinetics. If the dissolution zones of adjacent melt tracks overlap sufficiently with each other to dissolve large oxides, formed during printing or present in the powder feedstock, then the dispersoid structure throughout the build volume is homogeneous and matches that from a single pass within the dissolution zone. Gaps between adjacent dissolution zones result in oxide accumulation into larger slag inclusions. Predictions of final dispersoid size and slag formation using this dissolution zone model match the present experimental data and explain process-structure linkages speculated in the open literature.