X-ray speed reading with the MCRC: prototype success and next generation upgrades

TL;DR

This paper presents the successful development and testing of a high-speed, low-noise, radiation-hard ASIC for X-ray detector readout, demonstrating prototype performance and outlining next-generation upgrades for future X-ray missions.

Contribution

The paper introduces the MCRC-V1.0 ASIC prototype with high performance and low power, and discusses its radiation hardness and potential for next-generation X-ray detector readout systems.

Findings

MCRC-V1.0 ASIC achieves high speed and low noise performance.

The ASIC demonstrates radiation hardness up to 25 krad.

Next iteration will increase channel count and interface capabilities.

Abstract

The Advanced X-ray Imaging Satellite (AXIS) is a NASA probe class mission concept designed to deliver arcsecond resolution with an effective area ten times that of Chandra (at launch). The AXIS focal plane features an MIT Lincoln Laboratory (MIT-LL) X-ray charge-coupled device (CCD) detector working in conjunction with an application specific integrated circuit (ASIC), denoted the Multi-Channel Readout Chip (MCRC). While this readout ASIC targets the AXIS mission, it is applicable to a range of potential X-ray missions with comparable readout requirements. Designed by the X-ray astronomy and Observational Cosmology (XOC) group at Stanford University, the MCRC ASIC prototype (MCRC-V1.0) uses a 350 nm technology node and provides 8 channels of high speed, low noise, low power consumption readout electronics. Each channel implements a current source to bias the detector output driver, a preamplifier to provide gain, and an output buffer to interface directly to an analog-to-digital (ADC) converter. The MCRC-V1 ASIC exhibits comparable performance to our best discrete electronics implementations, but with ten times less power consumption and a fraction of the footprint area. In a total ionizing dose (TID) test, the chip demonstrated a radiation hardness equal or greater to 25 krad, confirming the suitability of the process technology and layout techniques used in its design. The next iteration of the ASIC (MCRC-V2) will expand the channel count and extend the interfaces to external circuits, advancing its readiness as a readout-on-a-chip solution for next generation X-ray CCD-like detectors. This paper summarizes our most recent characterization efforts, including the TID radiation campaign and results from the first operation of the MCRC ASIC in combination with a representative MIT-LL CCD.