An algorithm applied the Turing pattern model to control active swarm robots using only information from neighboring modules

TL;DR

This paper presents a novel algorithm that applies the Turing pattern model to control swarm robots using only local neighbor information, enabling self-organization, shape maintenance, movement, and self-replication.

Contribution

The proposed method uniquely integrates Turing pattern principles into swarm robot control, allowing modules to self-organize and move based solely on local information without identifiers or global coordinates.

Findings

Successfully maintained module group shape during movement

Achieved modules moving towards light sources

Demonstrated self-replication in simulation

Abstract

Swarm robots, inspired by the emergence of animal herds, are robots that assemble a large number of modules and self-organize themselves to form specific morphologies and exhibit specific functions. These modular robots perform relatively simple actions and controls, and create macroscopic morphologies and functions through the interaction of a large number of modular robots. This research focuses on such self-organizing robots or swarm robots. The proposed algorithm is a model that applies the Turing pattern, one of the self-organization models, to make a group of modules accumulate and stay within a certain region. The proposed method utilizes the area within the spots of the Turing pattern as the aggregation region of the modules. Furthermore, it considers the value corresponding to the concentration distribution within the spotted pattern of the Turing pattern model (referred to as the potential value in this research), identifies the center of the region (spotted pattern), and makes it the center of the module group. By controlling the modules in the direction of the higher potential value, it succeeds in maintaining the shape of the module group as a whole while moving. The algorithm was validated using a two-dimensional simulation model. The unit module robot was assumed to have the following properties: 1) limited self-drive, 2) no module identifier, 3) information exchange only with adjacent modules, 4) no coordinate system, and 5) only simple arithmetic and memory functions. Using these modules, the devised algorithm was able to achieve not only the creation of static forms but also the realization of the following movements: 1) modules accumulate and grow, 2) modules move to the light source, 3) exit the gap while maintaining its shape, and 4) self-replication.