LeakyOhm: Secret Bits Extraction using Impedance Analysis

TL;DR

LeakyOhm introduces a novel non-invasive side-channel attack exploiting impedance variations caused by stored data in registers, enabling secret key extraction from hardware AES implementations with minimal traces.

Contribution

This work demonstrates a new impedance-based side-channel attack method using RF analysis, challenging existing security assumptions and showing effectiveness against masked cryptographic hardware.

Findings

Single-trace key recovery on masked AES

Effective impedance analysis without profiling

Challenges the $t$-probing security model

Abstract

The threats of physical side-channel attacks and their countermeasures have been widely researched. Most physical side-channel attacks rely on the unavoidable influence of computation or storage on current consumption or voltage drop on a chip. Such data-dependent influence can be exploited by, for instance, power or electromagnetic analysis. In this work, we introduce a novel non-invasive physical side-channel attack, which exploits the data-dependent changes in the impedance of the chip. Our attack relies on the fact that the temporarily stored contents in registers alter the physical characteristics of the circuit, which results in changes in the die's impedance. To sense such impedance variations, we deploy a well-known RF/microwave method called scattering parameter analysis, in which we inject sine wave signals with high frequencies into the system's power distribution network (PDN) and measure the echo of the signals. We demonstrate that according to the content bits and physical location of a register, the reflected signal is modulated differently at various frequency points enabling the simultaneous and independent probing of individual registers. Such side-channel leakage challenges the $t$-probing security model assumption used in masking, which is a prominent side-channel countermeasure. To validate our claims, we mount non-profiled and profiled impedance analysis attacks on hardware implementations of unprotected and high-order masked AES. We show that in the case of the profiled attack, only a single trace is required to recover the secret key. Finally, we discuss how a specific class of hiding countermeasures might be effective against impedance leakage.