Implementation of a level-set based volume penalization method for solving fluid flows around bluff bodies in OpenFOAM

TL;DR

This paper presents a volume penalization-based immersed boundary method integrated with a level-set function in OpenFOAM for accurately simulating fluid flows around bluff bodies, validated through benchmark problems and demonstrating broad applicability.

Contribution

The paper introduces a novel VPM-IB technique with level-set integration in OpenFOAM, validated on complex bluff body flows, enhancing accuracy and applicability over existing methods.

Findings

Good agreement with body-fitted grid results

Effective in steady and unsteady regimes

Applicable to stationary and moving bluff bodies

Abstract

A volume penalization-based immersed boundary technique is developed and thoroughly validated for fluid flow problems, specifically flow over bluff bodies. The proposed algorithm has been implemented in an Open Source Field Operation and Manipulation (OpenFOAM). For capturing the fluid-solid interface more accurately, the grid is refined near the solid surface using topoSetDict and refineMeshDict utilities in OpenFOAM. In order to avoid any numerical oscillation, the present volume penalization method (VPM) is integrated with a signed distance function, which is also referred to as a level-set function. Benchmark problems, such as flows around a cylinder and a sphere, are considered and thoroughly validated with the results available in the literature. For the flow over a stationary cylinder, the Reynolds number is varied so that it covers from a steady 2D (two-dimensional) flow to an unsteady 3D (three-dimensional) flow. The capability of the present solver has been further verified by considering the flow past a vibrating cylinder in the cross-stream direction. In addition, a flow over a sphere, which is inherently three-dimensional due to its geometrical shape, is validated in both steady and unsteady regimes. The results obtained by the present VPM show good agreement with those obtained by a body-fitted grid using the same numerical scheme as that of the VPM, and also with those reported in the literature. The present results indicate that the VPM-based immersed boundary technique can be widely applicable to scientific and engineering problems involving flow past stationary and moving bluff bodies of arbitrary geometry.